I have consolidated all of the information that was originally available here (along with much more) into a complete book.  You can download it at the following link for free.

http://joshuagayou.com/downloads/AdvancedCigarBoxGuitarConstruction...

Views: 849

Replies to This Discussion

How did you curve the underside of the headstock (as seen in picture 2)? It looks more like a continuous piece of wood rather than a scarf joint.
The long, painful way to do it is by blending the joint with a half-round file. I roll it out over a bench top belt sander.

Scotty C. said:
How did you curve the underside of the headstock (as seen in picture 2)? It looks more like a continuous piece of wood rather than a scarf joint.
Josh is there any reason why you wouldn't shape the headstock before you make the scarf joint? It would seem that it would sit better being flat.

Brett
Josh, thanks for takeing the time out of your busy day to help everyone.

Cheers
Bob:)
Yes, if you leave it as square piece of wood, it's a lot easier to line up and get straight when you clamp the pieces together (when you make the scarf). If you have a cut headstock (especially if you do asymmetrical heads like I do) and you try to mate it up to the neck and clamp it, it might look just fine up close when you line it up but when you step away you'll realize that it bends off in one direction. If you clamp two square pieces together it's a lot easier to see that everything is straight because you can just lay a straight edge across it after you put the clamps on.

Brett Morgan said:
Josh is there any reason why you wouldn't shape the headstock before you make the scarf joint? It would seem that it would sit better being flat.

Brett
No worries :)

Bob Harrison said:
Josh, thanks for takeing the time out of your busy day to help everyone.

Cheers
Bob:)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Building a Cigar Box Guitar Part 1 - Intro

Started by Josh Gayou (SmokehouseGuitars). Last reply by Dan Mullen Feb 22, 2014. 6 Replies

Part 5 - Tapered Necks - Carving

Started by Josh Gayou (SmokehouseGuitars). Last reply by Mike Brobeck Oct 29, 2011. 7 Replies

Part 5 - Necks - Scarf Joints

Started by Josh Gayou (SmokehouseGuitars). Last reply by Josh Gayou (SmokehouseGuitars) Feb 23, 2011. 12 Replies

Building a Cigar Box Guitar Part 2 - Tools

Started by Josh Gayou (SmokehouseGuitars). Last reply by Wiley Rutledge Dec 14, 2010. 6 Replies

Building a Cigar Box Guitar Part 3 - Supplies

Started by Josh Gayou (SmokehouseGuitars). Last reply by ledbelly Nov 16, 2010. 2 Replies

Part 4 - Design

Started by Josh Gayou (SmokehouseGuitars). Last reply by Josh Gayou (SmokehouseGuitars) Nov 9, 2010. 2 Replies

Alternate Neck Joints - The V Joint

Started by Josh Gayou (SmokehouseGuitars). Last reply by colin mcgrath Nov 5, 2010. 6 Replies

Why You Shouldn't Listen Too Closely to the "Experts"

Started by Josh Gayou (SmokehouseGuitars). Last reply by colin mcgrath Nov 5, 2010. 9 Replies

Tung Oil Finish

Started by Josh Gayou (SmokehouseGuitars). Last reply by Fitzhugh Sep 12, 2010. 1 Reply

Part 5 - Necks - Fret Work

Started by Josh Gayou (SmokehouseGuitars). Last reply by Fitzhugh Aug 21, 2010. 23 Replies

Part 5 - Tapered Necks - The Fretboard

Started by Josh Gayou (SmokehouseGuitars). Last reply by Josh Gayou (SmokehouseGuitars) Jul 30, 2010. 5 Replies

Guitar Wiring Basics

Started by Josh Gayou (SmokehouseGuitars). Last reply by ian frazier May 14, 2010. 2 Replies

String Intonation Explained

Started by Josh Gayou (SmokehouseGuitars) Feb 10, 2010. 0 Replies

Part 6 - Finishes - French Polish

Started by Josh Gayou (SmokehouseGuitars) Feb 8, 2010. 0 Replies

Improvised Bench Dogs

Started by Josh Gayou (SmokehouseGuitars). Last reply by HOGS GRUNT Oct 11, 2009. 1 Reply

mini-humbucker

Started by bucky. Last reply by bucky Dec 31, 2008. 3 Replies

Blog Posts

I have not been 'round in a long time.

Posted by Craig Mayhem on November 22, 2023 at 11:28am 1 Comment

New Album 2023

Posted by Gary O'slide on November 5, 2023 at 2:41am 0 Comments

Spammer Alert, Beware!!!

Posted by BrianQ. on September 11, 2023 at 6:30am 1 Comment

Montana Mandoline

Posted by CaptnCatfish on August 27, 2023 at 6:26am 3 Comments

Latest Activity

Doug Thorsvik commented on Chance's photo
Thumbnail

IMG_20230413_161432341

"Uncle Crow: still a classic! Thanks for reminding us Chance."
7 hours ago
Doug Thorsvik commented on RON NORTHCUTT's photo
Thumbnail

Brick House!

"Sweet build Ron! It’s a looker. I like the green Brick House box; I’ve only seen the…"
7 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Thats Life K.L.Gordon - D. Kay BCB a .k. a. A. D . Eker 2023

"Twangy goodness Andries! You know how to bring it…"
8 hours ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Who's Cheatin' Who (on cigar box guitar) | Charly McClain cover

"A new song for me, engaging and peppy! I like it Kale. Keep ‘em coming."
8 hours ago
Chance updated their profile
8 hours ago
Chance posted a photo

IMG_20230413_161432341

My first build (7 years ago). Three string "Uncle Crow" style. It's still a good player, I just do…
8 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Peace Like a River: 2-String Chugger License Plate Cigar Box Guitar

"Peacefull river , fountain joy, one finger superstrum ! Go Doug Go !"
12 hours ago
A.D.EKER commented on 3 String Blues's video
12 hours ago
A.D.EKER commented on A.D.EKER's video
12 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Thats Life K.L.Gordon - D. Kay BCB a .k. a. A. D . Eker 2023

"Allright Alan !! Yep i mist that one ,did do a tune on that one a fjew years early by Doris Day !…"
12 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Peace Like a River: 2-String Chugger License Plate Cigar Box Guitar

"I don’t actually know why I know this song, I just do! Sounds like you watched a pretty high…"
14 hours ago
AGP # liked Rob Uker's photo
14 hours ago

Events

Music

© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->