Replies to This Discussion

Permalink Reply by Fish-O on July 10, 2013 at 10:29am

• ▶ Reply

Permalink Reply by Fish-O on August 23, 2013 at 5:49pm

Well, I've been learning some songs and its made me have to learn some things about guitar playing that I did not know...
Been fun....here is a tune.
http://youtu.be/YssaIZAXYwk

• ▶ Reply

Permalink Reply by Keni Lee Burgess on August 24, 2013 at 2:14am

Nice build. I'm interested in hearing your resonator design. I like Open G (Dgbd)

• ▶ Reply

Permalink Reply by Fish-O on August 24, 2013 at 8:42am

It's prolly not a true reso design in the technical sense really...just took the two soap dish parts drip part you see on top and tray below..inverted (flipped) the part with the drip holes...used a square u bolt to hold two pieces together...top of bolt is the bridge.
The metal box/reso is then attached to the top...it's suspended inside for a little better vibration.
It's got a tiney sound to it...but nothing like a true reso really.
I also attached a dual piezo pickup to the bottom of the metal box.
It sounds good plugged into a bass amp.
That's about it really.

• ▶ Reply

Permalink Reply by Keni Lee Burgess on August 24, 2013 at 2:18am

I use standard medium gauge, the 4 highest strings: Dgbe and tune the e down to d. / The high e is usually a .013 but I replace it with a .016. This is not necessary, especially if you want to tune back up to standard too, but the heavier string seems to improve the tone for the slide considering we are tuning down. Enjoy your new build.       

• ▶ Reply

Permalink Reply by Bluesheart on August 28, 2013 at 2:40am

Cool looking guitar. I look for potential guitar parts no matter where I go! I am so glad to see Kenis' post cause I'm doing a 4 string, but in nylon, Dgbe, but plan on spending most of the time dropping that e to d for some open G slide work on the nylons!

• ▶ Reply

Permalink Reply by Bluesheart on August 28, 2013 at 2:49am

I may be worthwhile to put a hole in that steel dish to let more  of the sound into the box? (acoustically) Although if it is going to be primarily electric, this may be better? I have the top half of one of those soap trays, just waiting for a box that inspires me.

• ▶ Reply

Permalink Reply by Bluesheart on August 28, 2013 at 2:50am

NO master by the way, just my opinion.

• ▶ Reply

Permalink Reply by Fish-O on August 28, 2013 at 4:37am

Things I don't know...would be cool to get some more sound out of it acoustically.
Thanks!

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page