so I having finished my first licence plate build I am now moving onto my first oil can build using an engine/motor oil can.  this is going to be a trial run before I work on one for a very patient and understanding customer.  he would like me to use part from a broken 6 string electric of his including the humbucker pickups.  my first two questions.  

I know to access the inside the best way is to cut the bottom off the can how is it best to reattach this? I currently have in mind to then make a frame around the inside to attach the bottom back on.

are there any electronic issues I should be aware of when trying to fit two pickups inside? this I fear is going to be the hardest part due to low access from only one angle.

Views: 448

Reply to This

Replies to This Discussion

Brilliant!

Why not Dremel out the opening for the neck, cross cut an X and peel it open.  When you go bend it back, you can put a metal tab on the inside that's threaded or use sheet metal screws to hold the X closed...

thanks for the advice so far guys I will let you know how it goes.  life got a bit hectic round here recently, only manage to get as far as glueing the neck and fretboard and planing it down after at the moment.  haven't done more than mark out the can yet!

ok guys been quite a while.  I have ended up building both since I last posted! the red one was a 'rough and ready' practice without any pickup so i had minimal cutting.  the second I removed the base completely, glued in a timber frame and screwed it back on.  doesn't add too much weight and I am pleased with the result I hope the customer will be too!

Attachments:

no it came like that.  was such a nice can that i didn't want to cut into it!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

J. D. Woods replied to J. D. Woods's discussion Song lyrics for Steve's new song
3 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Thanks AGP# Glad you liked  my version ! appreciated !"
4 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"You are very observant Andries! Some of the Slingers are more consistent than others and I…"
5 hours ago
David L. replied to J. D. Woods's discussion Song lyrics for Steve's new song
"Not sure how accurate the lyrics are (link to the lyrics site at the bottom) "Internet…"
5 hours ago
David L. liked David Hopkins's photo
5 hours ago
David L. liked David Hopkins's photo
5 hours ago
David L. liked David Hopkins's photo
5 hours ago
J. D. Woods posted a discussion

Song lyrics for Steve's new song

Hey Cigar Boxers,Just listened to Seasick Steve's new song, Internet Cowboys. Does anybody know…See More
6 hours ago
AGP # commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"A Different, but very Likeable take on a Classic Blues Song :-)"
7 hours ago
AGP # liked A.D.EKER's video
7 hours ago
T-Gripped liked David Hopkins's photo
12 hours ago
Jim Weaver updated their profile
13 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->