Need sources to buy dulcimer soundboard wood - Cigar Box Nation2024-03-28T17:29:14Zhttps://www.cigarboxnation.com/forum/topics/need-sources-to-buy-dulcimer-soundboard-wood?groupUrl=dulciworld&feed=yes&xn_auth=noThanks for the suggestions, e…tag:www.cigarboxnation.com,2016-09-10:2592684:Comment:26877822016-09-10T16:45:09.415ZDano Schultzhttps://www.cigarboxnation.com/profile/danoschultz
<p>Thanks for the suggestions, everyone! I also found this company - Woodcraft, <a href="http://www.woodcraft.com/" target="_blank">http://www.woodcraft.com/</a> - that ships and has retail locations with one kinda near me. I'll be shopping them all...</p>
<p>Seth, my design looks a lot like yours - a rectangle w/ humbucker pickup, etc. Yours looks like how nice I hope mine will be. Thanks for the pictures.</p>
<p>Thanks for the suggestions, everyone! I also found this company - Woodcraft, <a href="http://www.woodcraft.com/" target="_blank">http://www.woodcraft.com/</a> - that ships and has retail locations with one kinda near me. I'll be shopping them all...</p>
<p>Seth, my design looks a lot like yours - a rectangle w/ humbucker pickup, etc. Yours looks like how nice I hope mine will be. Thanks for the pictures.</p> I used 1/8 birch plywood from…tag:www.cigarboxnation.com,2016-09-09:2592684:Comment:26873542016-09-09T12:58:01.842ZSeth Tabbererhttps://www.cigarboxnation.com/profile/SethTabberer
<p>I used 1/8 birch plywood from a local craft store for this build: <a href="http://www.cigarboxnation.com/photo/mountain-dulcimer-1" target="_blank">dulcimer</a></p>
<p>It came in a 12"x24" size that I cut by hand into two 6"x24" sized pieces. But I've seen other craft stores that stock sizes that wouldn't need to be cut at all.</p>
<p></p>
<p>I used 1/8 birch plywood from a local craft store for this build: <a href="http://www.cigarboxnation.com/photo/mountain-dulcimer-1" target="_blank">dulcimer</a></p>
<p>It came in a 12"x24" size that I cut by hand into two 6"x24" sized pieces. But I've seen other craft stores that stock sizes that wouldn't need to be cut at all.</p>
<p></p> Check out the scroll-ready wo…tag:www.cigarboxnation.com,2016-09-09:2592684:Comment:26873472016-09-09T11:43:40.153ZScott aka Farmer Tedhttps://www.cigarboxnation.com/profile/ScottakaFarmerTed
<p>Check out the scroll-ready wood from Ocooch Hardwoods. The have a variety of woods, exotic and domestic, in thicknesses of 1/16" or 1/8", and up to 12" wide. Each piece will be 24" long and their prices are reasonable too.</p>
<p>Check out the scroll-ready wood from Ocooch Hardwoods. The have a variety of woods, exotic and domestic, in thicknesses of 1/16" or 1/8", and up to 12" wide. Each piece will be 24" long and their prices are reasonable too.</p> Dano, as you're here in cigar…tag:www.cigarboxnation.com,2016-09-09:2592684:Comment:26871452016-09-09T05:00:07.207ZKirk Bolashttps://www.cigarboxnation.com/profile/KirkBolas
Dano, as you're here in cigar box instrument land, I reckon that you're not looking to build something that has the sensibilities of fine old world European craftsmanship. Please pardon me if my supposition is in error. You might check out IKEA's as the shelving and some of the smaller furniture pieces (like an end table or bedside table) and book cases use thin wood panels for the non-weight bearing, non critical portions of some of the products. It's wood, but it's raison d'être is for…
Dano, as you're here in cigar box instrument land, I reckon that you're not looking to build something that has the sensibilities of fine old world European craftsmanship. Please pardon me if my supposition is in error. You might check out IKEA's as the shelving and some of the smaller furniture pieces (like an end table or bedside table) and book cases use thin wood panels for the non-weight bearing, non critical portions of some of the products. It's wood, but it's raison d'être is for aesthetic purposes only, so it's pretty thin to keep costs down. The other thing I'm thinking of is that I vaguely recall GB Gitty having a precut, DIY box kit that one can purchase for assembling an instrument that's essentially a cigar box guitar, but without having to pay a premium for a cigar box with art work. It seems to me it was only about $10 and the top on that might work. In either case you'll have leftovers suitable for other projects when your done. Just a thought and I figure it has to be more economical than the grade of spruce that Stew Mac is selling for making a flat top acoustic guitar. I love Stew Mac, but they're kinda pricey sometimes. WWW.Folkcraft.com has tops/bo…tag:www.cigarboxnation.com,2016-09-09:2592684:Comment:26872142016-09-09T03:21:04.376ZBert Bennetthttps://www.cigarboxnation.com/profile/BertBennett
<p><a href="http://www.Folkcraft.com">WWW.Folkcraft.com</a> has tops/bottoms, fretboards, sides, heads, everything you need. Good variety of woods. Prices are reasonable.</p>
<p><a href="http://www.Folkcraft.com">WWW.Folkcraft.com</a> has tops/bottoms, fretboards, sides, heads, everything you need. Good variety of woods. Prices are reasonable.</p>