I have been building my CBG's with 1 X 2 maple. I have given one to a friend and he says that the neck is starting to bow. Is this a problem others have seen and any suggestions on how to prevent bowing would be welcome. Thanks.

Views: 157

Replies to This Discussion

Sounds like the neck is under lots of tension,scale length? what strings, how high is it tuned? Maybe a pic? Have you tried using a heel, or adding a hardwood fretboard with your builds? Shorter scale lengths like 23” are less likely to bow as quickly. 

I am using a 25.5" scale length with medium strings. This particular CBG does not have a heel. It was the first electric I built. I did not add a fret board, simply wood burned the fret lines. Thanks for the info.

Maple is generally very strong unless the wood is still green and hasn't been dried out before use.

Are you absolutely sure it is indeed Maple?

Yes. 

Lou, I had that issue with my first two.  I was able to salvage both of them by adding another 1X2 on the back side.  Honestly this was probably overkill but looks and plays nice.  The boxes in both cases had enough depth to add a .75" board.  Even though they were stick thru designs, I kept the bridge end of the stiffener inside the box, and then tapered the neck end of the stiffener so it blended into the original neck between nut and first fret.  The guys I've talked with who use quarter inch fretboards on a 1X2 neck don't seem to have this issue so again my solution is probably overkill.

I am sure that adding another 1 X 2 to it will help. Thanks.

I don't have Maple available near me, I've been using Red Oak with great results. I do add a 1/4" fingerboard of the same type of wood to all of mine. those additional ieces glued to the neck help a lot. Also use non adjustable trussrods on 4 string or more gits or bass gits.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

 


Discussion Forum

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels 16 hours ago. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig on Wednesday. 5 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig on Wednesday. 17 Replies

Drawings or pictures on the box

Started by Martin. Last reply by Chad Taylor Oct 22. 6 Replies

Hard metal bridges

Started by Michael Myers. Last reply by Michael Fred Johnson Oct 22. 2 Replies

Getting the most sustain on a fretless CBG.

Started by Joe Plotts. Last reply by Taffy Evans Jun 30. 4 Replies

2nd Build Electronics Questions

Started by Steven Adler. Last reply by Steven Adler Apr 20. 4 Replies

yard sticks for fret boards

Started by Raymond L. Last reply by the anonymous pick Apr 17. 3 Replies

Where in the UK.

Started by Ian MCDONALD. Last reply by Lazylefteye Mar 28. 4 Replies

whaaaaaa?

Started by andrew payton-smith. Last reply by Taffy Evans Mar 7. 11 Replies

wiring a split coil mini humbucker

Started by Don Tucker. Last reply by Taffy Evans Mar 6. 2 Replies

Canjo tuning

Started by declan foley. Last reply by Taffy Evans Nov 23, 2020. 18 Replies

License Plates for LPGs

Started by T-Gripped. Last reply by Tim Pannabecker Nov 13, 2020. 6 Replies

Box style - acoustic or electric

Started by Warren McLennan. Last reply by Tim Pannabecker Aug 7, 2020. 13 Replies

Obvious overlooked error. Do I rebuild this neck?

Started by Michael shrader. Last reply by mitch jones Jun 5, 2020. 9 Replies

Neck is bowing

Started by Lou Ellis. Last reply by Paul Craig Apr 21, 2020. 10 Replies

Too far gone??

Started by T-Gripped. Last reply by BrianQ. Mar 30, 2020. 13 Replies

Finishing Fretboard

Started by Jeffrey Phillips. Last reply by Gus K Mar 4, 2020. 5 Replies

Yardstick Fretboards

Started by Jim Codog. Last reply by Gus K Feb 17, 2020. 9 Replies

Snake oil pick up install question

Started by Michael shrader. Last reply by Gus K Feb 17, 2020. 1 Reply

Blog Posts

Uncle Enos CBG Banjo Build

Posted by Greg on November 29, 2021 at 7:24pm 0 Comments

To Reach the Chord

Posted by Rich on November 12, 2021 at 10:20am 0 Comments

Seasonal build contest?

Posted by smilingdog1 on October 29, 2021 at 9:20am 9 Comments

Latest Activity

Doug Noren liked Dar Stellabotta's video
27 minutes ago
Bob "Ambrose" Negus liked Corin Mitchinson - End's photo
52 minutes ago
Bob "Ambrose" Negus commented on Corin Mitchinson - End's photo
Thumbnail

4 String Kettle Thing.

"You've done a fine job, That is a great looking KG!"
52 minutes ago
Bob "Ambrose" Negus liked Corin Mitchinson - End's photo
57 minutes ago
Bob "Ambrose" Negus liked Corin Mitchinson - End's photo
58 minutes ago
Bob "Ambrose" Negus liked BUGGY (C)'s video
1 hour ago
Bob "Ambrose" Negus liked A.D.EKER's video
1 hour ago
Bob "Ambrose" Negus commented on A.D.EKER's video
Thumbnail

The Wheel of the World C. Underwood - A. D. Eker 2021

"Very nice rendition Andries! Great sound from that 4-stringer!"
1 hour ago
Randy S. Bretz posted a photo

Baritone lap steel fretboard

Rosewood with dyed green coffee stir stick fret line`s and brass bar fret markers.
1 hour ago
Bob "Ambrose" Negus commented on Dar Stellabotta's video
1 hour ago
Bob "Ambrose" Negus liked Poorness Studios's video
2 hours ago
smilingdog1 liked Doug Thorsvik's video
4 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->