Hello, looking for advice. Just built my first ever instrument. Really enjoyed the building experience but the sound is dull and flat. Any advice on how to get it to sing. Tried a few different bridges but still sounds dull. The neck is straight through. Would it help to cut a recess in the neck? . Also the klid split and a I glued it back, could that be a reason? I have a whole load of. Iced and I'm planning to make a 2 string next then a 3 string so want to avoid the same mistakes

Views: 428

Reply to This

Replies to This Discussion

Putting the bridge close to the edge will make a more reserved guitar. The closer to the center of the box the better, most people put their bridge just off center for maximum effect.

Bigger wound strings will give off less volume than the smaller ones, solid strings are even louder. Acoustic strings will also offer less volume than steel electric strings. This is the reason acoustic guitars have a large and deep body compared to the small and thin CBG body.

Too many or too large soundholes will also have a affect the guitars acoustic volume. I noticed you have several soundholes, Try covering some of them with some tape to see if that makes a change. If it helps, you'll need to find a permanent way to seal some holes.

Always best to start with one or two small holes first, then decide on whether you need to make them larger or add more.

Placement of soundholes can also make a difference.

Not dull different keep building they will start to sound better

All the comments so far make a lot of sense, moving the bridge to about 1/3 from the back will help, as will a bridge with a smaller foot print, it seems you have a heavy string on a pretty short scale, that combined with a large soundhole area will make it hard for the bassier sound to ring out,[generally bigger sound holes will bring out the treble tones better], i'd definitely move the bridge forward a bit, and try lighter strings, 1 other thing that might help, as you split the lid, it may be flexing on the join and losing a lot of the string effect, if you can still open the box, a light bracing under where the bridge sits will stiffen it up a fair bit, probably only 3" or so long, 1/2" high and 1/4" wide, tapering that 1/2" high either side of centre

Thanks everyone for giving advice. I really appreciate the feedback a lot!.
Here's a link to what it sounded like  (I haven't bothered trying to tune it, and my 10 yr old daughter is filming). 

I will try out your suggestions.

  1. Move bridge
  2. Smaller bridge
  3. Lighter string (been using an old  bottom E string from acoustic)
  4. Block up a sound hole (they are 25mm) with tape.
  5. Possibly brace lid under bridge, but means cutting a recess out of the neck)

I forgot about the recess, that alone might help Rick, although there are many here who don't leave a gap, i always do

Nut and bridge are crucial for best sound, check the discussion initiated by John Mackay on

http://www.cigarboxnation.com/forum/topics/nut-slots-with-principle...

Took all the advice on board from you guys and I'm much happier with the sound now.

  • Moved the bridge,
  • Got a smaller bridge 
  • Cut out the recess in the neck
  • Used thinner gauge A string.

Now I just need to learn to play one. Cant say how much I appreciate the feedback. Next weekend project is building a 2 string and ill try a bone nut and bridge

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray yesterday. 2 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by A.D.EKER Jan 29. 3 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

HELP !! IN VERMONT.

Started by Ranblin' Dan Stevens in Other stuff - off topic, fun stuff, whatever. Last reply by Patrick Kelly Jan 21. 7 Replies

Fat Back Neck

Started by Jim Booth in Building Secrets, Tips, Advice, Discussion. Last reply by Jim Booth Dec 15, 2023. 7 Replies

Brick House CBG

Started by Ian Boyd in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Dec 13, 2023. 3 Replies

Best power tool for building?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Dec 11, 2023. 10 Replies

Latest Activity

Uncle John commented on A.D.EKER's photo
Thumbnail

BCB Dulcimer 2024

"Hunh.  Interesting build.  Neat.  Hope it plays good."
51 minutes ago
Uncle John commented on AGP #'s photo
Thumbnail

AGP #523 -''Clean Machine''

"I like the sound hole and pickup and the wood tone too.  You do a great  job on your…"
52 minutes ago
Uncle John commented on AGP #'s photo
Thumbnail

AGP #523 -''Clean Machine''

"Good name, good look, great wood burning!"
54 minutes ago
Uncle John commented on Poorness Studios's video
55 minutes ago
Uncle John commented on Gary O'slide's video
Thumbnail

Relaxing slide cigar box guitar

"Wow,  I liked that.  Peace giving goodness."
57 minutes ago
Uncle John commented on A.D.EKER's video
Thumbnail

The Black Cat Bone Song BCB 2024

"Andries, you are a rambler and a scrambler.  Good stuff, sir."
58 minutes ago
Uncle John commented on Uncle Toad's video
Thumbnail

Gotham Sound Check

"Hard to choose which I like best.  All good."
59 minutes ago
Uncle John commented on Steve Holladay's video
1 hour ago
Uncle John commented on Uncle Toad's video
Thumbnail

Gotham epoxied-in rod piezo demo - no squeeze

"Nice. I sure liked the pics of this one.  Nice jazzy play and tone with a bit of reso sound to…"
1 hour ago
Southern Ray replied to Chance's discussion Building with vintage paper/pressed board cigar boxes.
" Jon,  Use the HTML Editor at the top right of the posting window.  Cheers!"
7 hours ago
Southern Ray liked Uncle Toad's video
8 hours ago
Southern Ray commented on Uncle Toad's video
Thumbnail

Gotham epoxied-in rod piezo demo - no squeeze

" Sounds great! I'd like to thank you for this, since I just bought a license plate from…"
8 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->