Hello, looking for advice. Just built my first ever instrument. Really enjoyed the building experience but the sound is dull and flat. Any advice on how to get it to sing. Tried a few different bridges but still sounds dull. The neck is straight through. Would it help to cut a recess in the neck? . Also the klid split and a I glued it back, could that be a reason? I have a whole load of. Iced and I'm planning to make a 2 string next then a 3 string so want to avoid the same mistakes

Views: 428

Reply to This

Replies to This Discussion

Putting the bridge close to the edge will make a more reserved guitar. The closer to the center of the box the better, most people put their bridge just off center for maximum effect.

Bigger wound strings will give off less volume than the smaller ones, solid strings are even louder. Acoustic strings will also offer less volume than steel electric strings. This is the reason acoustic guitars have a large and deep body compared to the small and thin CBG body.

Too many or too large soundholes will also have a affect the guitars acoustic volume. I noticed you have several soundholes, Try covering some of them with some tape to see if that makes a change. If it helps, you'll need to find a permanent way to seal some holes.

Always best to start with one or two small holes first, then decide on whether you need to make them larger or add more.

Placement of soundholes can also make a difference.

Not dull different keep building they will start to sound better

All the comments so far make a lot of sense, moving the bridge to about 1/3 from the back will help, as will a bridge with a smaller foot print, it seems you have a heavy string on a pretty short scale, that combined with a large soundhole area will make it hard for the bassier sound to ring out,[generally bigger sound holes will bring out the treble tones better], i'd definitely move the bridge forward a bit, and try lighter strings, 1 other thing that might help, as you split the lid, it may be flexing on the join and losing a lot of the string effect, if you can still open the box, a light bracing under where the bridge sits will stiffen it up a fair bit, probably only 3" or so long, 1/2" high and 1/4" wide, tapering that 1/2" high either side of centre

Thanks everyone for giving advice. I really appreciate the feedback a lot!.
Here's a link to what it sounded like  (I haven't bothered trying to tune it, and my 10 yr old daughter is filming). 

I will try out your suggestions.

  1. Move bridge
  2. Smaller bridge
  3. Lighter string (been using an old  bottom E string from acoustic)
  4. Block up a sound hole (they are 25mm) with tape.
  5. Possibly brace lid under bridge, but means cutting a recess out of the neck)

I forgot about the recess, that alone might help Rick, although there are many here who don't leave a gap, i always do

Nut and bridge are crucial for best sound, check the discussion initiated by John Mackay on

http://www.cigarboxnation.com/forum/topics/nut-slots-with-principle...

Took all the advice on board from you guys and I'm much happier with the sound now.

  • Moved the bridge,
  • Got a smaller bridge 
  • Cut out the recess in the neck
  • Used thinner gauge A string.

Now I just need to learn to play one. Cant say how much I appreciate the feedback. Next weekend project is building a 2 string and ill try a bone nut and bridge

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Glenn Kaiser posted photos
3 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Glad to put a smile on your face BrianQ! This one is a fun one to sing and play."
3 hours ago
BrianQ. liked Doug Thorsvik's video
4 hours ago
BrianQ. commented on Doug Thorsvik's video
Thumbnail

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Another great oldie I thought I’d never hear on cbg!! :)"
4 hours ago
Doug Thorsvik posted a video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
7 hours ago
Matthias Bichsel left a comment for Moritz Voegeli
"www.cbguitars.ch auf FB This Bichsel"
yesterday
Matthias Bichsel left a comment for Moritz Voegeli
"Hallo, ich bin aus Solothurn. Lisa Stearns hat mich gefragt ob ich Dich kenne. Ich baue cbg. Gruss…"
yesterday
Matthias Bichsel liked Moritz Voegeli's profile
yesterday
BrianQ. left a comment for John Herrick
yesterday
BrianQ. left a comment for Daniel Cook
yesterday
BrianQ. left a comment for Skip Novakovich
yesterday
T-Gripped liked David Woodman 's photo
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->