Just curious if anyone has ever cracked open a old smoke detector/fire alarm and used the round metal piece as a piezoelectric by wiring it to a patch cord and jack? If so how did it turn out as far as sound quality? Thinking about giving it a try.

Views: 511

Reply to This

Replies to This Discussion

I've got some I pulled out of magnetic window alarms. They're a little bigger than a bottle cap. I'll let you know about the sound once I get one wired in.

I'll try that. My first two attempts will be on a one-string broom handle in a large almonds tin and a two string cbg. There's an interesting harmonic on the two-string that I'm interested to hear through amplification.
Wayfinder, I going to have to try that 2 string tuning.....

A two- stringer is also a great use of the leftover high B (string #2) and high E (string #1) tuned to G-D.  very Mandolin-like sound.

Yes. It's been done. Ages ago. You'd have to search back before 2011 on this forum, and the old Yahoo group before that.

Do a Search on "Piezo from smoke detector..."
Yeah ,if you would lane let me know how everything works out and "Wayfinder" Thank for the heads up on not going with one too small. Makes since and I have always thought you get the best sound out of a piezo by sandwiching it between the neck and lid. Thanks guys for the advice and lane ,Let me know how the window alarms work for you ,again Thanks guys!

One question...putting the piezo between the bridge/lid and neck, do you use hot glue or something, or just rely on the pressure to keep it in place?

Yeah Lane ,A lot use a a little glue to keep it in place and I have read several "how to articles" saying the same method with a bit of hot glue for those nights when you get a little carried away jamming ,just to make sure it want be moving around and falling out of place while your jamming. Also a lot of builders put a dab of hot glue over the wires they soldered to the disk ,Just for extra hold & keep it secured so no wires end up coming a part on you ..."added protection" I guess you could say!
"wayfinder" before I even started building my first CBG ,a builder that had been building for years told me to "MAKE SURE and sandwich the piezo in between the neck and box lid for the best results.

This is pretty cool idea. 

I got to toss a wet blanket on this one folks. What makes a detector work is a small radioactive plate, This plate is safe until you physically touch it. Piezos are cheap enough not to put yourself in harms way. 

I read this article years ago and have seen othets about taking the round piece of metal inside a smoke detector & wiring it up to a patch cord and jack ,wedge it in between the neck and lid top and I thought what a Great Idea. I got a carbon monoxide detector and its round metal disk is a little bigger than a bottle cap ,by just a little ,so I figure it will be plenty big enough to get a good sound out of ,just haven't tried it w the carbon monoxide detector and Piezoes are fairly cheap ,but I just thought "what a good Idea". There was also a article about cracking open a smoke detector for the same use in Guitar World not to long ago.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Your take on this bizarre guitar

Started by Infirmity Citrus President in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd yesterday. 2 Replies

Guitar Amp

Started by Chase N Williams in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig on Wednesday. 5 Replies

Blog Posts

Let’s talk Aeolian…

Posted by BrianQ. on August 27, 2022 at 12:05am 0 Comments

Building a Violin w/ GITTY Parts

Posted by Brad Craig on August 11, 2022 at 6:39pm 3 Comments

Effects Pedals

Posted by Trey Allensworth on May 26, 2022 at 10:04am 12 Comments

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->