simple as that. Trying to figure out how to do a nice sunburst on a box ?

Anyone ?

 

thanks

 

jim

Views: 1311

Reply to This

Replies to This Discussion

In general, you lay down your first color - frequently an amber - then seal over that with a clear coat. Spray your next color, lets say a red and clear seal over that. Then finish with a dark color such as a tobacco then do a final series of clear coats. This is often done with laquer and laquer dyes. You don't have to clear seal inbetween colors, but it helps if you need to remove the second or third color because you don't like it without removing everything. 

 

Stewart Mac also sells some rattle can lacquer that is predyed in various colors that can be used to make a nice sunburst finish. They actually displayed pictures of a cigar box guitar done that way on their site for a little while. If you have professional type spray finishing equipment they also sell some nice dyes that can be used to mix your own colors of lacquer.

 

Hope this helps.

 

Brian Hunt.

 

 

Hey Brian. Thanks

Nothing professional here I'm afraid (grin). It's a brush or spray can.

So, I'm guessing by spraying color lacquer it is not just a paint or a paint mixed clear coat, but something you call dye ?

 

Sorry for the brain freeze on this.

 

Jim

Hi Jim,

 

I forgot that Stewart Mac calls them a stain. All they really are is a colored dye such as that used for cakes (an edible dye) or cloth (a color dye to make our wardrobes brighter than natural fiber colors) only it is of a different chemical nature. When you use them on wood I forgot they call it a "stain" and instead I used the word "dye." Sometimes they are also called tints, just depends upon who you are talking to and the context. Stains, dyes and tints are somewhat translucant and allow the original texture of the materials they are used on to show through and enhances things like wood grain. Paint just covers everything up and is much more opaque.

 

Here is a link to the "stains"

 

and here is a link to the rattlecan "lacquer"

 

Here is a "how to" spray a sunburst article at Stewart Mac using their rattle spray cans. This guy sprays the sides his darkest color first, then goes to the lightest shade and sprays that, then blends with the middle color. After everything completley dries, then he does any cleanup and final polishing. Lots of ways to do a sunburst, you just need to experiment and find the way that works for you.

 

hope this helps.

 

Brian Hunt.

 

 

I believe my friend old Lowe has done a poor man's version of a sunburst with standard spray paint applied in layers of color and then sanded off with a careful light touch to reveal the color you want. flat paint works best and be sure each layer is bone dry before going on. I still plan on trying that on a crappy old 601 box I have laying around.

You can create a sunburst with all water or alcohol based stains on bare wood, or all tinted lacquer. Or a little of both.  The same Stew Mac Color Tone product will actually as both a wood stain and a lacquer tint. It's a great product by the way; I have some.

If you don't have any experience or equipment, I would go with spray cans. Practice on a scrap board first.

One final thought - a cigar box is usually a soft wood like cedar or paulownia. If you used stain, I think this would be like staining spruce - will probably end up blotchy. I would stick with the all-lacquer method if that's the case.

The Stew Mac "how to sunburst with spray cans" article link from Brian looks like a good place to start.

Spray cans. 3 different colors. Work inside color to middle color to outside edge color (usually black or dark brown), overlapping the colors a bit. Use quick, thin coats, and overlap them while still wet. Let 'em dry, then spray with clear coat. Sand with fine (400 to 600 grit sandpaper) lightly, and re spray with clear and resand, as many times as you want for the highest gloss finish you want. Then polish with a paste wax.

Practice on scrap wood.

I did one completely by accident on a light colored box. There was a black "made somewhere else" type painted onto the center of the box, so to get rid of it I used a rough sponge and Goof Off liquid. The scrubbing and the cleaner combined to strip enough of the finish off to change the color where I was working. It's not as cool as the multi-color methods, but as a quick simple way to spice something up it can be handy.


Pretty much how I do mine. I use a single action airbrush.



Brian Hunt said:

In general, you lay down your first color - frequently an amber - then seal over that with a clear coat. Spray your next color, lets say a red and clear seal over that. Then finish with a dark color such as a tobacco then do a final series of clear coats. This is often done with laquer and laquer dyes. You don't have to clear seal inbetween colors, but it helps if you need to remove the second or third color because you don't like it without removing everything. 

 

Stewart Mac also sells some rattle can lacquer that is predyed in various colors that can be used to make a nice sunburst finish. They actually displayed pictures of a cigar box guitar done that way on their site for a little while. If you have professional type spray finishing equipment they also sell some nice dyes that can be used to mix your own colors of lacquer.

 

Hope this helps.

 

Brian Hunt.

 

 

hey james, my method is wood dye and a blowtorch. first burn round the outside of the box (before adding wood dye, have tried it after and the flames were very impressive!!) burn less as you head inwards, quick passes... then rub on the wood dye or dyes as some can be quite yellowing. i sometimes go over it almost straight away with a wax which lifts some of the colour or sand with fine paper from the centre out, its all about experimenting and having an eye for how it develops. worth havin a go on a plank first tho.

hope this helps:0)

Thanks everyone !

Great places to start.

@Don -- thats one very pretty box mate.

 

My load of boxes just arrived today !!  still have to open the package to see the goodies inside.

 

Thanks !

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
14 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
14 hours ago
Kent Thurston updated their profile
15 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
15 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
15 hours ago
Poorness Studios liked A.D.EKER's video
17 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
18 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
20 hours ago
A.D.EKER commented on A.D.EKER's video
23 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->