I have an old 60s box with tape on it. I'd like to clean the wood but I am afraid to damage the tape. What is the best approach?

Thanks,
Dave

Views: 84

Reply to This

Replies to This Discussion

Hi Dave, there are many ways but without seeing the box and the tape in question I'd be worried I'd cause you to wreck it, with bad advice. What ever you try, if possible try it in an out of site place first.

My thought is to leave old boxes with the their old patina, make what you add to the box look as old even.

Just my thoughts Taff

Here it is.

Thx

Hi Dave, like I said there's many ways and I'm sure others will chip in, but here's what I would do........

Make up a template out of timber or use suitable strip of aluminium angle so that one side of the angle covers the tape around the edge of the box. I would wrap fine sandpaper around a block and sand up to the template. Now I'm thinking the sanding will not stop dead at the tape, but leave a darker un cleaned area inside the tape, this I would utilise as a sunburst effect. If you don't like that idea you'll have to spend more time sanding. 

I would also cover the centre design in a similar way and sand up to it. Again leaving the sunburst area if wanted, or not. 

Keep in mind I have not tried this, but it is what would try based on my experiences. Then hit the whole box with a suitable finish.

Taff

Thank you!

I say, glue down the loose paper & put a clear coat on it. It’s perfect as it is? People pay extra for that kind of patina?

The dirty area is really pronounced on one half of the top cover.  I'd like to at least even it out.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

 


Forum

2021 Throwback Holiday Build-Off Contest!

Started by Cigar Box Nation in Feature Articles. Last reply by smilingdog1 20 hours ago. 44 Replies

Squaring the neck

Started by Fantacone Box Works in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Nov 19. 16 Replies

Completed Builds

Started by ThePracticalPeasant in Building Secrets, Tips, Advice, Discussion. Last reply by Derek Waters Nov 5. 6 Replies

Blog Posts

Uncle Enos CBG Banjo Build

Posted by Greg on November 29, 2021 at 7:24pm 0 Comments

To Reach the Chord

Posted by Rich on November 12, 2021 at 10:20am 0 Comments

Seasonal build contest?

Posted by smilingdog1 on October 29, 2021 at 9:20am 9 Comments

Latest Activity

Glenn Kaiser commented on Randy S. Bretz's photo
Thumbnail

Assembly day

"I second that WOW! -Glenn"
1 hour ago
Priit Tamm posted a photo

#23 Shovel

Shovel with GDG tuning. Great for sliding and rocking!
2 hours ago
Carl Floyd liked Dale Armstrong's blog post This is my first cigarbox guitar.
2 hours ago
Uncle John commented on Uncle John's video
Thumbnail

CB Gitty Throwback Holiday Build Contest Entry.

"Thanks, Belinda.   It is the tale end of building season for me due to cold coming on…"
3 hours ago
bemuzic commented on Uncle John's video
Thumbnail

CB Gitty Throwback Holiday Build Contest Entry.

"nicely done video and beautiful build John"
5 hours ago
Gutbucketeer (Jim Bunch) commented on Will Carter's group Cigar Box Basses
12 hours ago
Wade commented on 3 String Blues's video
Thumbnail

1940's Kamaka Cigar Box Ukulele - Hawaii uke history

"Nice find! I bet Bill Jehle could help you get some more info on this beauty!"
13 hours ago
BrianQ. commented on Will Carter's group Cigar Box Basses
"Wade, that link’s not working?"
13 hours ago
Wade commented on Will Carter's group Cigar Box Basses
"Not cigar box basses, but thought I would leave a link for a page with cool washtub bass…"
14 hours ago
victor c. sotelo commented on Miku's photo
Thumbnail

Skiffle cigar box guitar

"Just bought the Garcia & Garcia beveled top box the other day. I was wondering about the neck…"
15 hours ago
RTZGUITARS replied to Slowpaw Steve T's discussion CIGAR BOX NATION CHRISTMAS ALBUM 2021
"I'm starting to think you really know Santa Steve. I think I can find a song around here. "
15 hours ago
RTZGUITARS posted a photo

Swiss Parlor

Only took 2 1/2 years!22.5 scale 12 fret. Flame Malpe neck Maple back and sides. Spruce top. jumbo…
15 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->