to help out the members here from oz,i am able to get kiln dried redgum for necks as we have a sawmill here in town,im a new member here,,but having read a past post I believe I can help,
just contact me via this forum and ill see what I can sort out,im in koondrook Victoria,on the murray river,regards dan
Tags:
try and avoid Melbourne,,used to live there,the pieces I can get you don't have to laminate,,solid pieces of kiln dried wood,i find 3/4 3" is good if you use a scarf joint for the headstock.but I can get almost any size,just depends if I have to pay for it,,regards dan
G'day Daniel,
Will you have any issues with shipping? If not keep us informed on how you go. I just did another quick Google search and there's bugger all available up my way (Sydney) except of course if you have no issues with buying a 3m x 2m dressed slab so I'm pretty much limited to using Tassie Oak (not that that's a bad thing of course) from Bunnings at $17 for a 40 x 18 x 2.4 length which I get two necks out of.
im happy to post to you what I can get,but Australia post is limited to 1 metre long,enough for a neck,also I can only get offcuts unless I wish to place a special order ( think dollars )I personally use a piece 3/4 x 3 " and scarf cut the neck on my tablesaw ( made a jig for the angle cut) then I glue it up and then rout the slot for the truss rod. let me know if your happy with a 1 metre piece and ill see what I can get,if I get it for free then you only pay postage regards dan
Cheers Daniel, be appreciated - just don't go out of your way on my account. Pity you don't have a pack n send down your way, the nearest is Shepparton and that's way out there for you.
I think you need to show me your scarf cut jig, I've been using my table saw for a while but the damn thing scares the shnitz outta me, dunno why I could do just as much damage with the drop saw ;-)
its not a problem,ill probably call in at the mill on Friday and see what I can pick up.
if you like ill do the scarf cut for you before I send the wood,at the moment I have the jig set at 12 degrees and I find that suitable,if you need a greater angle you can adjust it using an angled block to mount the neck to body (that's the usual Gibson method)
ill take some pictures of the jig and do a couple of diagrams if you like,i will eventually re design the jig to vary the angle hopefully your table saw can cut deep enough to do it in one slice.could you give me your address or just postcode so I can get the post office to calculate,dont want to take a guess and rip you off,regards dan by the way,,you can call me ferret if you like,,everyone else does,,,
Hi Dan,
Postcode is 2770, and appreciate you knockin up the diags etc.
I knew a Ferret once, haven't spoken to him since I gave the bikes up, I used USED to be called shaggy simply because my hair was that long I could sit on it - long gone now though, began to drive me nuts, even standing in the wind I looked like a demented Afghan Hound :-)
Cheers
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER 1 hour ago. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango yesterday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies 4 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!