H.F. Pull Saw size change ? - Cigar Box Nation2024-03-28T22:43:32Zhttps://www.cigarboxnation.com/forum/topics/h-f-pull-saw-size-change?feed=yes&xn_auth=nohere wayfinder cheap as chips…tag:www.cigarboxnation.com,2015-02-22:2592684:Comment:22398992015-02-22T19:21:48.316Zjohn mackayhttps://www.cigarboxnation.com/profile/johnmackay
<p>here wayfinder cheap as chips...</p>
<p><a href="http://www.ebay.com/sch/i.html?_odkw=honda+grab+rail&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=Zona+Razor+Saw+Set+3&_sacat=0" rel="nofollow" target="_blank">http://www.ebay.com/sch/i.html?_odkw=Zona+Razor+Saw+Set+3&_from...</a></p>
<p></p>
<p>cheapy one here...…</p>
<p></p>
<p>here wayfinder cheap as chips...</p>
<p><a rel="nofollow" href="http://www.ebay.com/sch/i.html?_odkw=honda+grab+rail&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=Zona+Razor+Saw+Set+3&_sacat=0" target="_blank">http://www.ebay.com/sch/i.html?_odkw=Zona+Razor+Saw+Set+3&_from...</a></p>
<p></p>
<p>cheapy one here...</p>
<p><a href="http://www.ebay.com/itm/zona-35-150-Razor-Saw-42T-in-/131432584799?pt=LH_DefaultDomain_0&hash=item1e99fe165f" target="_blank">http://www.ebay.com/itm/zona-35-150-Razor-Saw-42T-in-/131432584799?pt=LH_DefaultDomain_0&hash=item1e99fe165f</a></p> this what I did to my shark s…tag:www.cigarboxnation.com,2015-02-22:2592684:Comment:22397942015-02-22T16:17:08.140Zjohn mackayhttps://www.cigarboxnation.com/profile/johnmackay
<p>this what I did to my shark saw but took it off and put it on my Zona saw.</p>
<p>the shark cut was a little to wide for frets but the Zona was spot on.</p>
<p><a rel="nofollow" href="http://i96.photobucket.com/albums/l200/jmk151151/DSC02947_zps4b447ee6.jpg" target="_blank"><img src="http://i96.photobucket.com/albums/l200/jmk151151/DSC02947_zps4b447ee6.jpg" class="align-full"/></a></p>
<p>this what I did to my shark saw but took it off and put it on my Zona saw.</p>
<p>the shark cut was a little to wide for frets but the Zona was spot on.</p>
<p><a rel="nofollow" href="http://i96.photobucket.com/albums/l200/jmk151151/DSC02947_zps4b447ee6.jpg" target="_blank"><img src="http://i96.photobucket.com/albums/l200/jmk151151/DSC02947_zps4b447ee6.jpg" class="align-full"/></a></p> Be careful when ordering the…tag:www.cigarboxnation.com,2015-02-22:2592684:Comment:22390852015-02-22T04:06:38.370ZPizza Wizardhttps://www.cigarboxnation.com/profile/Derek
<p>Be careful when ordering the saw. There are 2 on harbor freight with the same description but they are different brands. I accidentally got the one made by portman and the frets were completely loose in the slots. I still used it but had to super glue every fret along the entire length. I am guessing the topman is the one you want.</p>
<p></p>
<p>Do NOT use this saw…</p>
<p></p>
<p>Be careful when ordering the saw. There are 2 on harbor freight with the same description but they are different brands. I accidentally got the one made by portman and the frets were completely loose in the slots. I still used it but had to super glue every fret along the entire length. I am guessing the topman is the one you want.</p>
<p></p>
<p>Do NOT use this saw</p>
<p><a href="http://www.harborfreight.com/12-in-flush-cut-saw-62118.html" target="_blank">http://www.harborfreight.com/12-in-flush-cut-saw-62118.html</a></p> just to recap on the shark sa…tag:www.cigarboxnation.com,2015-02-03:2592684:Comment:22218792015-02-03T17:08:13.058Zjohn mackayhttps://www.cigarboxnation.com/profile/johnmackay
<p>just to recap on the shark saw.</p>
<p>I put a flat bar onto the blade to stiffen it up.</p>
<p>cut some slots today and a midge dick to big. so had to glue them in.</p>
<p>just bought a <span>Zona Razor Saw Set 3.so we'll see how things go with that.</span></p>
<p>just to recap on the shark saw.</p>
<p>I put a flat bar onto the blade to stiffen it up.</p>
<p>cut some slots today and a midge dick to big. so had to glue them in.</p>
<p>just bought a <span>Zona Razor Saw Set 3.so we'll see how things go with that.</span></p> I recommended the Shark saw a…tag:www.cigarboxnation.com,2015-01-27:2592684:Comment:22154442015-01-27T20:32:09.043ZBen "C. B. Gitty" Bakerhttps://www.cigarboxnation.com/profile/cbgitty
<p>I recommended the Shark saw after ordering it, cutting some slots with it in and testing those slots with several of our fret wires (medium/medium, medium/higher, narrow/lower) and it seemed to be a nice snug fit. I do not know what is going on with them but until i can get it sorted out I have removed the recommendation and listing from my store.</p>
<p>I recommended the Shark saw after ordering it, cutting some slots with it in and testing those slots with several of our fret wires (medium/medium, medium/higher, narrow/lower) and it seemed to be a nice snug fit. I do not know what is going on with them but until i can get it sorted out I have removed the recommendation and listing from my store.</p> Darrel I have a new Irwin tha…tag:www.cigarboxnation.com,2015-01-27:2592684:Comment:22155082015-01-27T18:18:31.506ZGary Rosshttps://www.cigarboxnation.com/profile/GaryRoss
<p>Darrel I have a new Irwin that cuts a .022" had an old one that was beat up but it still works but now the new one will just be frets no loaning to neighbors. The Shark saw is from CB Gitty and has the not so snug kerf.<a target="_blank" href="http://imageshack.com/a/img673/306/E08ZR1.jpg"><img class="align-full" src="http://imageshack.com/a/img673/306/E08ZR1.jpg"/></a></p>
<p>Darrel I have a new Irwin that cuts a .022" had an old one that was beat up but it still works but now the new one will just be frets no loaning to neighbors. The Shark saw is from CB Gitty and has the not so snug kerf.<a target="_blank" href="http://imageshack.com/a/img673/306/E08ZR1.jpg"><img class="align-full" src="http://imageshack.com/a/img673/306/E08ZR1.jpg"/></a></p> I haven't Gary been to busy p…tag:www.cigarboxnation.com,2015-01-22:2592684:Comment:22108882015-01-22T09:48:29.107Zjohn mackayhttps://www.cigarboxnation.com/profile/johnmackay
<p>I haven't Gary been to busy playing catch up with more work.</p>
<p>since cutting my thumb etc I've not done any work for about 3 weeks or more.</p>
<p>after building my stock up I get about 7 orders to build racks and now I've got a couple of more request so my new hobby is put on hold till I get these out of the way.gotta earn my living.</p>
<p>I'm typing this while having my breakfast!</p>
<p>I haven't Gary been to busy playing catch up with more work.</p>
<p>since cutting my thumb etc I've not done any work for about 3 weeks or more.</p>
<p>after building my stock up I get about 7 orders to build racks and now I've got a couple of more request so my new hobby is put on hold till I get these out of the way.gotta earn my living.</p>
<p>I'm typing this while having my breakfast!</p> Gary,the .028 kerf was always…tag:www.cigarboxnation.com,2015-01-22:2592684:Comment:22105732015-01-22T05:54:33.022Zdarryl kernaghanhttps://www.cigarboxnation.com/profile/darrylkernaghan
<p>Gary,the .028 kerf was always going to be a touch oversize,i'm trying to figure whu Ben recommended it,although 5 thou is not a huge amount,doubt your frets will lock in securely.And,just a tip,keep your saw square to the board surface,any wobble will widen the kerf slightly</p>
<p></p>
<p>Gary,the .028 kerf was always going to be a touch oversize,i'm trying to figure whu Ben recommended it,although 5 thou is not a huge amount,doubt your frets will lock in securely.And,just a tip,keep your saw square to the board surface,any wobble will widen the kerf slightly</p>
<p></p> Just did a side by side test…tag:www.cigarboxnation.com,2015-01-22:2592684:Comment:22106292015-01-22T05:12:02.909ZGary Rosshttps://www.cigarboxnation.com/profile/GaryRoss
Just did a side by side test in the Irwin new, Irwin old, Shark seen on CB Gitty and the Harbor Freight saw. Both Irwins (see link to saw in post "Harbor Freight pull saw size change" post) cut .022 " the shark .028 and the Harbor Freight .030+ . CB Gitty frets are loose on the HF finger push in on the Shark and the Irwins are just right to hammer or press in . See photo below
Just did a side by side test in the Irwin new, Irwin old, Shark seen on CB Gitty and the Harbor Freight saw. Both Irwins (see link to saw in post "Harbor Freight pull saw size change" post) cut .022 " the shark .028 and the Harbor Freight .030+ . CB Gitty frets are loose on the HF finger push in on the Shark and the Irwins are just right to hammer or press in . See photo below John did you try your saw yet…tag:www.cigarboxnation.com,2015-01-21:2592684:Comment:22102222015-01-21T18:56:46.680ZGary Rosshttps://www.cigarboxnation.com/profile/GaryRoss
<p>John did you try your saw yet? I got the new saw (Irwin) and will give it a try tonight. If your saw is too loose in kerf we should let Ben CB Gitty know. Ill try mine tonight.</p>
<p>John did you try your saw yet? I got the new saw (Irwin) and will give it a try tonight. If your saw is too loose in kerf we should let Ben CB Gitty know. Ill try mine tonight.</p>