Hello,

I just realized that the fretboard that I built was straight, and the frets I bought were curved.

When installing them, I cut the slot a bit deeper than needed and hammered them in place (classy...), which does barely the trick.

Do you go for a fretboard with a radius + curved frets ? Or flat fretboard and frets ? Or a mix of both (then I missed something on the installation :-) )

I read that with curved frets, it's easier to bar chords for folk guitars, but I'm not sure with a cigar box guitar with 3 strings and a narrow neck it's required.

WDYT ?

Thanks !

Ben

Views: 110

Reply to This

Replies to This Discussion

Hi, Ben.  I saw your pics and the guitar looked pretty good.   It's usually best to start simple and work up.  You started kind of complicated with a scarfed neck and frets.   I have built a lot of cbgs and maybe 20 or more with frets.  I get frets from CB Gitty right here on this site.   I use medium/medium and they work well for me.  I think they are flat frets.  I think 95% of use flat frets.  

Gitty sells a DVD fretting instructional.  I have not actually watched it.  I cut my frets with a nipper and 'dress' the ends with a stationary belt sander.  Not proper, but it works for me.    And I put a piece of scarp wood over the frets and hammer them in.  

Someone with better skills than me probably has a how-to fret video on youtube.

Hi Ben 

,you are. Correct a radiused fingerboard aids fingering on a wide fingerboard. I think three stringers don't need it. Neck is not tapered wider at one end.

i always overradius my frets, or slight radius on flat boards. Assuming you slot is the correct width and grips the tang, as the radiused fret is tapped in it flattens out and the barbs in the tang move slightly left an right as well as down. This creates a better grip at the ends.

Taff

Hm ok I'll go first with simple flat fretboard and flat frets first. I purchased online a fret saw because it's too sloppy using my regular saw and some glue to compensate the wider slots.

Note for Uncle, I started without frets and had a lot of fun with the slide, but I was greedy and wanted to try out everything directly, I'm currently riding the beginner enthusiasm wave :-)

Haha, it's gonna be a long wave, I'm still learning after 50 years building and repairing. I think one has to be like a sponge soak up as much info as you can, you will need it one day. Glad to hear you got a proper fret saw. Back in the day I tried to modify 4 or 5 regular saws, but the best one is one made for the job.

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Music Theory

Started by John Derrett in Performances, How to Play, Lessons, Concerts. Last reply by Poorness Studios on Sunday. 9 Replies

Help

Started by Raymond Grimmitt in Performances, How to Play, Lessons, Concerts. Last reply by Korrigan Jan 15. 4 Replies

6 pole PU

Started by Tim Pannabecker in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Jan 10. 9 Replies

Greetings

Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Nayeb Gofs Dec 28, 2021. 1 Reply

Blog Posts

"Little Fish" Project

Posted by Steve Bookout on January 22, 2022 at 11:12pm 0 Comments

How to add photos?

Posted by Stephen Sell on January 13, 2022 at 1:19pm 2 Comments

My first 3 string cigar box guitar

Posted by Stephen Sell on January 13, 2022 at 1:16pm 1 Comment

Shedding a Tear for Dave Lynas

Posted by Poorness Studios on December 20, 2021 at 8:30pm 4 Comments

Latest Activity

BrianQ. left a comment for Sam Harrelson
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
2 hours ago
BrianQ. left a comment for Terry
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
2 hours ago
Carl Floyd replied to Mel Cooke's discussion Is it OK to use a hardtail bridge on a fretless 3 string acoustic?
"Won't hurt to try it.  You may be surprised. I built this one just to use in my computer…"
3 hours ago
Rope Walker Country Star left a comment for A.D.EKER
"Greets ADEker! Nice to hear from you. No Radio Shows for a while. I been workin tryin to stay ahead…"
3 hours ago
Uncle John commented on T-Gripped's photo
Thumbnail

1st CBG of 2022

"That is a beauty."
4 hours ago
Uncle John commented on T-Gripped's photo
Thumbnail

Cohiba 3-string

"Yup. He says that about this one. Dave Lynas would approve."
4 hours ago
Uncle John commented on T-Gripped's photo
Thumbnail

Cohiba 3-string

"Great box. Simple, elegant, old schoool."
4 hours ago
Uncle John posted a photo
5 hours ago
Profile IconTerry and Sam Harrelson joined Cigar Box Nation
5 hours ago
Jerry Jordan commented on T-Gripped's photo
Thumbnail

Cohiba 3-string

""High 9's" as UJ would say, looks real nice!"
7 hours ago
3 String Blues posted a photo

Box Guitar Blues

---------------------I am editing new photos for the websiteat…
10 hours ago
the anonymous pick commented on T-Gripped's photo
Thumbnail

Cohiba 3-string

"Cohibas are such nice boxes ;-)  good stuff. "
12 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->