What wood do you all recommend for a fretless neck on a 3 string CBG?

Next Do you all put truss rods in the neck?

Thanks all

Views: 704

Reply to This

Replies to This Discussion

Fretless == easier to build and play

Truss rods aren't necessary but if you have heavier strings or weak wood, it will help. I don't put in traditional truss rods. I put in 1/8"x1/2" bar stock set perpendicular to the fingerboard. Also a separate fingerboard will add strength.

-WY

I have some red oak and poplar but I was going to put a finger board of an exotic Bocote wood just for looks. Thanks for the advice on the truss rod I figure the oak is pretty strong and the Bocote is dense so I will probably be alright with that combo

Do you leave your fret board flat or do you give it a slight radius?

Hi Lester.

I agree with Wes. Most DBGs are three or four string (you don't say how many you are planning for) and if you choose a suitable wood you will have no problems. Also it is less critical on a fretless than on a fretted, so rest easy. I only use recycled wood. Old wood is much more stable and normally completely free (I like free) and you can go around feeling eco smug if that pleases you. Most hardwoods are more than stiff enough and some soft woods. Oak, mahogany, maple are all good, but there are loads of others. If you are gluing on a fretboard, just the fact that you have laminated the neck in that way will help a huge amount (except for the bit that's inside the box where the fretboard doesn't extend). I have made several three stringers with parana pine (a softwood) but with a mahogany or beech fretboard (also one with rubber wood). Really no problems.

Good luck and all the best.

John

Thanks John I should have mentioned I am building a 3 stringer I figured it would be fine with a hard wood as long as I didn't go to crazy with the string gauges. Thanks for all the great input looking forward to getting started on it.

Plenty of first builds are 3-string fretless with a 1x2 stick of poplar and no fingerboard.  That will get you through your first batch of mistakes pretty quickly.  Save the exotic stuff for your 2nd, 3rd or 4th guitar when you won't feel so bad about monkeying up a perfectly good piece of wood.

Sorry. I've just got to disagree with ED. Save the exotic stuff for your fourteenth fifteenth an sixteenth. Only kidding of course. A three string fretless with a hardwood neck will be fine. Put whatever strings you like on it. Having said that, I prefer nickel wound strings (normally lighter) to phosphor bronze wound even acoustically. Did a comparison with Martin bronze and Martin nickel and much preferred it even without an amp. Of course that doesn't mean that you will prefer them. Just saying.

Hahahahahaa.  I thought who would dare disagree?

Use the oak for the first one, they are so simple it will come out great and who wants a great CBG with a warping poplar neck. : )  I don't think the oak is much more at the lowes than the poplar. 3 string fretless is the way to go, and no truss rod is needed if a hard wood is used, I have not had a bent neck yet, from string tension anyway. I've used Cherry and black walnut. Both hard enough but I think the oak is stiffer.

I am going to use the oak with a fret board of another wood. I have a lot of exotic wood left in my shop so I will be building a bunch of these little guitars

I had the same concerns regarding the truss rod, what I did originally is split the neck wood then I reverse the grain, before I glue it up, I also cut three strips of wood the same thickness, then glue up the split neck of mahogany, the strip of purple heart, a strip of mahogany, the second strip of purple heart, and then the other split of mahogany, the woods are an example.

I have started using a carbon fiber rod on the Cigarbox basses. On the picture below I just used one strip of purpleheart

http://inlinethumb52.webshots.com/39603/2561932700033885154S600x600...

Thats pretty awesome I always put a power lam in my bows the same principle this is something I may do for the looks and the strength cool bass neck by the way

Thanks, I can't draw a bow anymore 'cause I screwed up my arm but I plan on putting an archery woods walk in the lower 10 for a bushcrafter Rendezvous in October.

I got a little over ten acres of this kind of flora on the farm.

 

 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
4 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
4 hours ago
BrianQ. commented on Dar Stellabotta's video
9 hours ago
BrianQ. liked Dar Stellabotta's video
9 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
11 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
11 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
13 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
13 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
14 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
15 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
15 hours ago
A.D.EKER commented on Ricky D's photo
15 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->