Hi,
The guitar that was played over in the video section is this one. Just to give those interested a better look.
New Guinee rosewood body with a Burdiken Plum top, Fingerboard is rosewood, and the neck is maple.
Pickups are Seymour Duncan Pearly Gates humbuckers. The body is chambered so as to make it lighter.



Cheers Taff

Views: 269

Reply to This

Replies to This Discussion

Nice, that headstock reminds me of G&L 

Hi Brian, yep it seems that whatever changes one makes from one builders design makes it close to someone else’s.

. At a glance the body looks like that of Tele, but their are slight differences. Taff

like the headstock as well. 

may i enquire as to how much you would sell a guitar like that for? i mean if someone commisioned it ? 

Hi Tim thanks for your inquiry. I don't have a set price as there are so many variables, and even more when you start talking to the customer about their wants and needs.
I have not built a solid body for a number of years but back then I suppose a build like the one pictured could be around $2300.00 and up.
Cheers Taff

cheers Taff.

very reasonable for a bespoke custom job.

Hi Tim, I look at it as buying from the manufacturer at wholesale prices, with no middleman.
I have pulled back on building on commission as people always wanted something different from what I already had, or was building at that time. The acoustic guitar I just completed took seven years to finish due to selling off it but not getting the chance to complete it.
So now it's a case of - ya buy what I got - or pay a premium for special orders. All guitars are still different in some way from each other
Taff

Looks great Taffy. How do you like the Pearly Gates pickups?

Hi Paul, thanks for the comment.

Regarding the pickups, yes I like them, not sure how to describe the sound of them but I find that through my A-class valve amp, I get different tones between the neck and bridge pickups. I'm not talking about the usual warm-to-bright change in tone but the bridge pickup also has a different sound. This I like when soloing as I can switch from one to the other to add some variety and a different feel to the piece.

I normally play on the bass side of the tone pot, as the treble settings are very single-coil sounding. That's about the best I can do, I do not know if that makes sense.

I also use a '59 Bassman pedal or an Ibanez tube screamer pedal.

Cheers Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Best power tool for building?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield 5 hours ago. 2 Replies

Fat Back Neck

Started by Jim Booth in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd on Thursday. 2 Replies

Back of the box or the lid?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Dec 2. 8 Replies

Pin Tin Banjo

Started by Michael Bowlin in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Nov 1. 11 Replies

EBE tuning

Started by Thomas A Morphew in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Oct 30. 2 Replies

Blog Posts

Who will be the first to embed GO in CBG? =)

Posted by Vlad on December 6, 2023 at 12:17am 4 Comments

My first CBG from Captain Nemoff.

Posted by Vlad on November 29, 2023 at 3:41am 0 Comments

New Album 2023

Posted by Gary O'slide on November 5, 2023 at 2:41am 0 Comments

Latest Activity

Justin Stanchfield replied to Justin Stanchfield's discussion Best power tool for building?
"Thanks for the advice. I took woodshop way back in school and over the years have used table and…"
5 hours ago
Taffy Evans replied to Justin Stanchfield's discussion Best power tool for building?
"Hi, for me...all of the above.Hahaha. But seriously, when I started I made my table saw. made my…"
6 hours ago
Justin Stanchfield replied to Tim O'Flynn's discussion Cutting down the neck of a CBG
"I was thinking the same thing. My wife gave me that kit for Christmas a few years back and…"
7 hours ago
Dab and Darryl Tuttle are now friends
7 hours ago
Dab left a comment for Darryl Tuttle
"Not bad just trying to learn how to play it now.. my bridge was too tall and I shortened it I got…"
7 hours ago
Dab left a comment for Darryl Tuttle
7 hours ago
Darryl Tuttle left a comment for Dab
"Welcome to CBN? How’s the build going?"
7 hours ago
Justin Stanchfield commented on Doug Thorsvik's video
8 hours ago
Justin Stanchfield commented on Glenn Kaiser's video
8 hours ago
Justin Stanchfield posted a discussion

Best power tool for building?

Apart from a Makita drill, a Dremel and a couple of chainsaws, everything I build is done with hand…See More
8 hours ago
BrianQ. posted a status
"Been posting in visual mode with no problems since the latest maintenance update, is it fixed or am I just lucky?"
13 hours ago
BrianQ. left a comment for Dab
13 hours ago

Events

Music

© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->