Diamond core drill bit for fret dots etc - Cigar Box Nation2024-03-28T09:19:02Zhttps://www.cigarboxnation.com/forum/topics/diamond-core-drill-bit-for-fret-dots-etc?groupUrl=specialtoolseitherboughtorhomemade&feed=yes&xn_auth=noMind blown!
tag:www.cigarboxnation.com,2016-01-24:2592684:Comment:24988592016-01-24T18:05:12.601ZGipson Fat Fingers Shoemakerhttps://www.cigarboxnation.com/profile/GipsonShoemakerIII
<p>Mind blown! </p>
<p></p>
<p>Mind blown! </p>
<p></p> Thanks for the advice
tag:www.cigarboxnation.com,2014-06-18:2592684:Comment:20265242014-06-18T06:51:29.299Zstringybarkhttps://www.cigarboxnation.com/profile/2yk2ho4alv7y2
<p>Thanks for the advice</p>
<p></p>
<p></p>
<p>Thanks for the advice</p>
<p></p>
<p></p> A bit of good advice on these…tag:www.cigarboxnation.com,2014-06-16:2592684:Comment:20253042014-06-16T11:10:38.677ZTitch the Clownhttps://www.cigarboxnation.com/profile/TitchtheClown
<p>A bit of good advice on these is that when doing shell, glass or other materials where the dust is a health risk do the core drilling in a tray of water.</p>
<p>A bit of good advice on these is that when doing shell, glass or other materials where the dust is a health risk do the core drilling in a tray of water.</p> I'm of to ebay..thanks tit…tag:www.cigarboxnation.com,2014-06-14:2592684:Comment:20240902014-06-14T11:00:23.817Zstringybarkhttps://www.cigarboxnation.com/profile/2yk2ho4alv7y2
<p> I'm of to ebay..thanks titch, always after good "handy'tools...I have used a 1/8inch dowel bit to drill holes and a paper punch to get the actual "hole", but this gives a bit more room for "creativity"..cheers mate!</p>
<p> I'm of to ebay..thanks titch, always after good "handy'tools...I have used a 1/8inch dowel bit to drill holes and a paper punch to get the actual "hole", but this gives a bit more room for "creativity"..cheers mate!</p>