I just strung this wine box upright  and I must say I am underwhelmed with the results. The D and G string are okay but the E and A are dull, dull, dull.

I can think of a few possible reasons for this: the sound board is nailed on (should be glued), the sound board is two pieces of wood with T&G joint. I think the main problem is the F holes are too close together and much of the sound board is cut off from the bridge vibrations. I'm thinking using the box bottom for a new sound board with more strategic F holes or even using a piece of 3mm ply (though I prefer the look of the original box wood). I'm also thinking about doing a new bridge. The strings are Slap Happy Weed Wackers.

Any suggestions will be appreciated.

Views: 119

Reply to This

Replies to This Discussion

Maybe if you bought a regular set of strings, it would then sound better. Using weed wacker for stings instead, you don't always get what you want.

The thickness of the body plays a big part in how much sound you get. The thicker the wood the less over all sound. Even the sides and back matter. 

Another lost post?? It seams above. But maybe fixed now?

Hi, here is my 2nd go at posting here, [and it did not work this time either] although it will be a shorter version
Firstly, I don’t feel that weed Wacker cord has enough mass in them to drive the thick-ish top of your box. Deeper sounding instruments normally have a larger sound box and longer scales. Within a larger box comes more air, your strings must move a thicker top that in turn has to move more air, which carries the sound…. or not.
You will recall that strings are “wound” so as to add that mass, as they go from treble to bass they get heavier.
Two-piece tops and backs are a requirement in well-built acoustic instruments.
The sides do not play a part and are not that important in the sound producing cycle, other than being stiff enough not to rob the top and back of vibrations.

Thanks for all the replies. I replaced the soundboard with 5mm ply and changed the sound hole cutouts. This improved all the strings but still the G sounds good and the others are progressively duller. I agree that I think the problem is primarily the strings. The strings are nylon with a kevlar core and the manufacturer says they are primarily use for rockabilly slapping. You can see in this video how the low notes don't sustain well even on a genuine upright. Still this guys uses them to great effect.


Taffy, what do you mean by "Two-piece tops and backs are a requirement in well-built acoustic instruments."?

Ha, joke is on me. I was just photographing the bass for the gallery and it fell and broke two of the ten inch long tuning pegs.

Hi, in your opening post you mentioned the top was joined by a tongue and groove joint. In case you thought that that may be detrimental, I mentioned that good acoustic instruments have top and back plates joined down their centre.
I only do it on cbgs to get a larger top or back panel.
In case anybody is interested, the reason for “book matching”, slicing a board and opening it like a book and then gluing together has several benefits.
1- The close grain sides of the ½ board faces are glued together. That makes the centre of the top stiffer and stronger. The outside edges are more flexible.
2- There is also a more uniform layout of grain lines that aids in better sound production
3- On the back it allows for the matching of complex grain patterns.
The photos my explain this better.

But.. you don't have to follow the rules, here is a three piece back.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Back of the box or the lid?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Dec 2. 8 Replies

Pin Tin Banjo

Started by Michael Bowlin in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Nov 1. 11 Replies

EBE tuning

Started by Thomas A Morphew in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Oct 30. 2 Replies

Blog Posts

Who will be the first to embed GO in CBG? =)

Posted by Vlad on December 6, 2023 at 12:17am 4 Comments

My first CBG from Captain Nemoff.

Posted by Vlad on November 29, 2023 at 3:41am 0 Comments

New Album 2023

Posted by Gary O'slide on November 5, 2023 at 2:41am 0 Comments

Latest Activity

Bernie Edwards liked Randy S. Bretz's photo
5 hours ago
BrianQ. left a comment for Andrew Manring
5 hours ago
BrianQ. left a comment for Jorro
5 hours ago
BrianQ. left a comment for Gregorio
5 hours ago
BrianQ. left a comment for G H
5 hours ago
BrianQ. left a comment for Mark Groth
5 hours ago
BrianQ. left a comment for Brett
5 hours ago
BrianQ. left a comment for Damien Powers
5 hours ago
BrianQ. left a comment for Charles Hodges
5 hours ago
BrianQ. left a comment for jeffrey hammell
5 hours ago
BrianQ. left a comment for Garrick
5 hours ago
BrianQ. left a comment for American
5 hours ago



© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->