Replies to This Discussion

Permalink Reply by David L. on November 26, 2009 at 5:46am

Hi,
Not sure if this is what you mean, they are cheap and cheerful and you don't need bridge pins.
http://cgi.ebay.co.uk/Acoustic-Guitar-Bridge-Tailpiece-No-Pins-Need...

This ebay shop often sells bridges of good quality with mother of pearl inlay as auctions and you can often get a bargain
http://stores.shop.ebay.co.uk/Taisamlu-Musical__W0QQ_armrsZ1

Have bought several metal bridges off http://stores.shop.ebay.co.uk/bezdez and rate them very highly - they sell numerous types of bridges at a good price ,good quality and very helpful.


Regards,
David

• ▶ Reply

Permalink Reply by Ron Moucka on November 27, 2009 at 4:28am

Thanks David, but the bridges I'm looking for bolt to the instrument body. The strings pass through the bridge and over the saddle. The ball end of the strings keep the strings from passing through the bridge.

Like the one on this thing:

http://cgi.ebay.com/35-WOOD-Backpacker-Hawaiian-TRAVEL-GUITAR-with-...

check out the enlarged picture.

If anyone knows where I can get this kind, I'd appreciate it. But no biggie if I don't.

Thanks again,

Ron

• ▶ Reply

Permalink Reply by David L. on November 27, 2009 at 6:45am

Hi Ron,

I see what you are after now - never seen one sold on its own so no help I am affraid.
You might have more look if you post it in the "Building secrets,Tips, Advice, Discussion" bit of the forum as it seems to get a quicker turn over for questions and answers.

Good Luck,
David

• ▶ Reply

Permalink Reply by David L. on November 27, 2009 at 6:53am

Hi Ron,
Nearest I could find are for classical guitars which would need a bit cut off each side to get the shape you want
http://cgi.ebay.co.uk/ROSEWOOD-CLASSICAL-GUITAR-BRIDGE-with-pattern...
http://cgi.ebay.co.uk/WOOD-CLASSICAL-GUITAR-BRIDGE-new_W0QQitemZ200...
http://cgi.ebay.co.uk/OLD-STOCK-CLASSICAL-GUITAR-BRIDGE-QUALITY-LIG...
David

• ▶ Reply

Permalink Reply by Andy Estabrooks on November 27, 2009 at 12:51pm

These look like a typical uke bridge. I know Stu Mac sells 4 stringers for about $8 (or $4 ea if you buy 12) they come with a bone blank. You may have some luck with a uke parts supplier for six strings.
Andy

• ▶ Reply

Permalink Reply by Diydc on November 27, 2009 at 3:47pm

Would it not be possible to simply make one yourself?
You only need a bit of dry nutwood or rosewood and a bone from the local butchers to get it going.
No real mystic to it at all.

• ▶ Reply