Well have ventured into the 6 string area 3 times, making a short scale 23" and the neck thru to the end of the box. I have to say I didn't like any of them, so I am going to try the Josh Gayou way, SO do you guys angle the neck any with this method, I do angle my 3 and 4 strings but I don't use the same method with those.

Thanks for any and all help!

Views: 502

Reply to This

Replies to This Discussion

I've made 3 six strings in the last few years and I have never angled the necks of any of them, I simply mount them straight as I would on a solid bodied instrument. I find it very effective for the six string models and agree it is effective for the 3 string model. may I ask what bridge type you intend to use as an angled neck may not be as effective with, for example, a hardtail Stratocaster bridge.

by the way, here is one of my Six Strings with a 4 string neck as well.

Attachments:
Yes JP, I was planning on using a hard tail bridge, I hadn't thought about this aspect of the build.

I'd let the bridge height dictate whether you need to set the neck or not,i like a bit of rake on my necks as it's easier to dial the bridge in,but if your using a pre made bridge,that should be your reference pont

Okay Darryl you are starting to talk the guitar playing talk, 'Rake', that's the thing you use in the yard, isn't it!

I've made a few guitars that should be buried

For my licence plate 6 string I had to have a break angle , due to using a tune o matic bridge and Bigsby tremolo. I just shimmed under the neck heel. With Tele and Strat hard tail bridges you don't need that angle , as those bridges can sit pretty low.  I guess it really depends on the type bridge you decide to use.

I've worked on and have owned a few guitars that came from the factory with shims under the neck. I've made one 6 sting. Used a factory made neck and stoptail bridge. Angled the neck using folded aluminum foil. Kept setting and reseting till I hit the sweet spot. 

I've built a few six stringers and usually angle the neck just slightly (1~2 degrees). If I'm using a thru-neck, then I can trim a bit from the bottom end to get the angle. Shimming on the neck side would also work.

It doesn't take much angle to work and sure doesn't hurt anything.

Stew Mac now sells neck pocket shims with either 1 degree or 5 degree angles for fixing guitars. Good price too.

Aluminum foil is WAY cheaper. : )

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

String grounding

Started by John B Treutlein in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 6 hours ago. 1 Reply

DYI Box

Started by Jerry Draper in Using cigarboxnation.com - posting, profiles, web help. Last reply by John B Treutlein 21 hours ago. 12 Replies

Neck though corner

Started by Engblom in Building Secrets, Tips, Advice, Discussion. Last reply by Infirmity Citrus President Jan 28. 2 Replies

Canjo pickups

Started by David Blackburn in Building Secrets, Tips, Advice, Discussion. Last reply by Byrd Franklin Dec 22, 2022. 5 Replies

Blog Posts

A Tribute

Posted by Ghostbuttons on January 15, 2023 at 12:00pm 1 Comment

Let’s talk Aeolian…

Posted by BrianQ. on August 26, 2022 at 5:05pm 0 Comments

Latest Activity

Bernie Edwards commented on AGP #'s photo
5 hours ago
Taffy Evans liked Jerry Draper's discussion DYI Box
6 hours ago
Taffy Evans replied to John B Treutlein's discussion String grounding
"Hi, it will be ok, but if using a piezo pickup there is no need to earth to the strings. This is…"
6 hours ago
AGP # posted photos
7 hours ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

My 5 WORST Musical Creations (least useful DIY instruments)

"and Thats What Counts!! thanks for showing us ,to do a voice over,whit your own Music and special…"
11 hours ago
John B Treutlein liked John B Treutlein's discussion New member with a new build nearly done
11 hours ago
John B Treutlein replied to John B Treutlein's discussion New member with a new build nearly done
"Thank you Taffy,appreciate the help,I just finished grounding for the strings and the next step is…"
11 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

FORD Hubcap slide BCB 2023

"Hia Keith ! thank you for your LIKE Vote ! Here  at BcB we do like your effort  ,we do…"
11 hours ago
John B Treutlein posted discussions
12 hours ago
Doug Thorsvik posted a video

Devil in Disguise: 2-String Surf SLG License Plate Guitar (Not a Cigar Box Guitar)

Cigar Box Guitar Slingers - Spokane, 139th Zoom Mtg 01/30/23. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/downloadCBG Main Songbook...
13 hours ago
Taffy Evans replied to John B Treutlein's discussion New member with a new build nearly done
"Welcome john, nice looking first build When first putting the strings on, if you have not done it…"
15 hours ago
Jim Booth replied to Jim Booth's discussion Guitar Rack
"Will do!"
17 hours ago

Music

© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->