Forums

Posted by Robbie on October 24, 2023 at 2:46pm

Buzzing is coming from the bridge. Could it be I need to sharpen the edge of the banjo bridge . It's flat right now. Thanks

You need to be a member of Cigar Box Nation to add comments!

Email me when people reply –

Taffy Evans October 25, 2023 at 5:08pm

Hey Robbie, thanks for the feedback, without it folks don't learn a whole lot from the forum. It's all about sharing. Sharing what works and what does not.
Cheers Taff
BrianQ. October 25, 2023 at 1:00pm
Robbie October 25, 2023 at 12:41pm

Thanks Taffy! Too shallow a break angle at the bridge. Just a thin slice of wood under it did the trick!
Robbie October 25, 2023 at 8:08am

Can't seem to post a picture. Just let's me reply. There is no definite take off point from the bridge. No slots cut into it. So I'll cut the grooves in the bridge.
Taffy Evans October 24, 2023 at 4:01pm

Hi, photo would help, but check grooves in bridge for size. Do you have sufficient break angle over the bridge?
Taff

This reply was deleted.

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Please check your browser settings or contact your system administrator.