I've recently finished my first build, a CB Gitty kit. It appears to have ignited a spark inside and I'm already planning a second build.

I've managed to come across this Camacho box. The colours and high gloss finish are, to my eye, simply stunning. The lid & sides are quite thick, about 9.5mm or 3/8" while the base is 3mm or 1/8" and is covered in felt on the outside.

My question is whether it would it be better as acoustic or electric. Does it make any difference at all? Any advice on style of build suitable for this box would be most gratefully received!

Views: 242

Attachments:

Replies to This Discussion

Warren, first off, welcome to the addiction!!!  I would expect that box to be best utilized for an electric guitar.  That's not to say you couldn't make it acoustic, but it will take quite a bit more effort in all likelihood.  To get a decent acoustic response and still show off that glossy top, you'd have to remove quite a bit of material from the bottom face of the lid, and even then depending on the material in the lid it may not yield a good acoustic result.  I'd suggest a 3, 4, or 6 string with a nice mag pickup.  

That's exactly what I needed to know. Looks like my next build will be electric, so I'm off to the drawing board to work out what I'm going to do with it. Thank you for your help.

Warren,  Brian is the big dog around here.  I love the flat pups, I use them almost exclusively.  It will make a great electric, but please paint tape the areas you are working on cause those tops are very easy to scratch.  

MadGomer, is a big dog too

Welcome Warren,

MadGomer is a 100% correct.  Thick tops (sound boards) are best used as electric guitar.  The great acousticals Have a much thinner sound board, think a standard Dreadlock acousti, the sound board is very thin.  Padron is a great example of a great sound board.

Thank you Tim!

Warren, like Madgomer said, you could thin out the underside of the lid. However, if you have done this, then you know it can be a pain, especially if it’s MDF? Another option is to use the bottom of the box, which is always the thinnest part of the box, but I get that you’re trying to showcase the top, so you might not want to? Most of the builds I have seen using that box have been electric, with that said, there’s nothing keeping you from trying.  I would throw a Flatpup on it & move on to the next. Good luck on this one :)

P.S. another idea is to look through the Pics section for builds that have used this box, or simply use the “Search” box at the top right of the page for other members Camacho builds?

Thank you. Yeah, I definitely want the top on show. I'm not too au fait with parts as yet, can you tell me what a Flatpup is? I assume it's a pickup of some sort?

Thanks for the tip on searching for others with the same box. I'll have a good look.

Warren, here's an example of a flatpup, many other options to choose from.  CB Gitty is a good source.  

https://www.flatpup.com/

These are nice because they simply mount on the surface, just as long as your fretboard and bridge design provides sufficient string height.  Other mag pickups would require that you carve out the top and potentially the neck to get the right clearance.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16. 6 Replies

Frettin' and stainin'

Started by Douglas Allen Laffin. Last reply by Order99 Aug 11. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 11. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by MadGomer Feb 27. 19 Replies

Doubling the high string

Started by Robert Killen. Last reply by Tim Pannabecker Feb 25. 22 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23. 2 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Drawings or pictures on the box

Started by Martin. Last reply by Chad Taylor Oct 22, 2021. 6 Replies

Hard metal bridges

Started by Michael Myers. Last reply by Michael Fred Johnson Oct 22, 2021. 2 Replies

Getting the most sustain on a fretless CBG.

Started by Joe Plotts. Last reply by Taffy Evans Jun 30, 2021. 4 Replies

2nd Build Electronics Questions

Started by Steven Adler. Last reply by Steven Adler Apr 20, 2021. 4 Replies

yard sticks for fret boards

Started by Raymond L. Last reply by the anonymous pick Apr 17, 2021. 3 Replies

Where in the UK.

Started by Ian MCDONALD. Last reply by Lazylefteye Mar 28, 2021. 4 Replies

whaaaaaa?

Started by andrew payton-smith. Last reply by Taffy Evans Mar 7, 2021. 11 Replies

Blog Posts

Let’s talk Aeolian…

Posted by BrianQ. on August 27, 2022 at 12:05am 0 Comments

Building a Violin w/ GITTY Parts

Posted by Brad Craig on August 11, 2022 at 6:39pm 3 Comments

Effects Pedals

Posted by Trey Allensworth on May 26, 2022 at 10:04am 12 Comments

Latest Activity

BrianQ. replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"3 necker is doable? https://youtu.be/iAiLIbSh0gI"
27 minutes ago
Taffy Evans replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"Hi, a three-neck instrument sounds interesting. I think it would be a better deal to build an…"
4 hours ago
BrianQ. commented on Papa D's photo
Thumbnail

camacho3

"Those boxes are mighty thick!"
5 hours ago
BrianQ. liked Randy S. Bretz's photo
5 hours ago
BrianQ. commented on BUGGY (C)'s video
Thumbnail

Swampy Resurrection - (The Journey)

"Been too long, I missed your vids buggy!!!"
5 hours ago
BrianQ. liked BUGGY (C)'s video
5 hours ago
AGP # liked Randy S. Bretz's photo
8 hours ago
AGP # liked BUGGY (C)'s video
8 hours ago
Randy S. Bretz posted a photo

Just the coverplate and strings yet!

Had to replace the piezo cable with a piezo rod. Bad cable!
8 hours ago
Infirmity Citrus President replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"I was thinking, buy it, add two necks, tune one each EBE, DAD, and DGD. This is Soviet era, so not…"
8 hours ago
BUGGY (C) posted a video

Swampy Resurrection - (The journey)

Finding the Swampy again... I did a similar video yesterday but it strangely deleted itself as all strange things that happen whjen you pull out your swampwi...
8 hours ago
Infirmity Citrus President replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
8 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->