Replies to This Discussion

Permalink Reply by Cigar Box Nation on December 19, 2009 at 2:48pm

Back when I lived alone, I was bored one Saturday night, about 2am. I got up, put $10 in my pocket and went to WalMart with the challenge, "what can I build from $10 in WalMart parts?" When I passed the home section, I saw a cheap metal black mailbox. I took it home, killed an old acoustic for it's neck and built a dobro:

• ▶ Reply

Permalink Reply by Outhouse Instruments on December 19, 2009 at 3:59pm

Here's the damage ... I don't usually name projects, I did once with an off-road vehicle and it developed a life of it's own .... .... but I give you ...
DUBBLE TRUBBLE

Beside of it is the main culprit ... a newish build in 25.5" scale that I have been playing. It broke a string and it was all down hill from there. Matt

• ▶ Reply

Permalink Reply by Tres Seaver on December 19, 2009 at 4:39pm

Matt Towe said:

Here's the damage ... I don't usually name projects, I did once with an off-road vehicle and it developed a life of it's own ....
.... but I give you ...

DUBBLE TRUBBLE

Looks awesome: how does it sound? Did you have to drill out tuners for the WW line?

• ▶ Reply

Permalink Reply by Outhouse Instruments on December 19, 2009 at 5:18pm

No drilling ... I ended up just re-stringing as it was. EAD ... top 3 strings from a set of Pearce's.
Tuned GDG for now. Sounds good, mellow and louder (acoustically) than any other CBG I've built.Maybe baritone-ish?
In fact, I doubt I'll put a pick-up in this one. Buuuut I do have a cb mic element that was in the old box.
Tomorrow it gets fretted.

Matt

• ▶ Reply

Permalink Reply by Tres Seaver on December 20, 2009 at 5:30am

Matt Towe said:

No drilling ... I ended up just re-stringing as it was. EAD ... top 3 strings from a set of Pearce's.
Tuned GDG for now. Sounds good, mellow and louder (acoustically) than any other CBG I've built.Maybe baritone-ish?
In fact, I doubt I'll put a pick-up in this one. Buuuut I do have a cb mic element that was in the old box.
Tomorrow it gets fretted.

How did you end up treating the join between the two boxes?

• ▶ Reply

Permalink Reply by Outhouse Instruments on December 20, 2009 at 6:42am

I cut holes in the ends leaving about 1/2" lip. Then glued with Titebond II and several clamps. I then cut out the ends and middle just like you would for a regular neck-thru.

Matt

• ▶ Reply

Permalink Reply by Outhouse Instruments on December 24, 2009 at 10:30am

This thing is quickly becoming my favorite player!

I'm looking for more boxes that will work together.

Matt

• ▶ Reply

Permalink Reply by Diydc on December 26, 2009 at 12:30pm

That is fookin`fantastic.
I have been doing the same with old steel toolboxes. Seem to be very popular down here as well.....

Shane Speal said:

Back when I lived alone, I was bored one Saturday night, about 2am. I got up, put $10 in my pocket and went to WalMart with the challenge, "what can I build from $10 in WalMart parts?" When I passed the home section, I saw a cheap metal black mailbox. I took it home, killed an old acoustic for it's neck and built a dobro:

• ▶ Reply