Finished the first build. I need to post some picture. It came out pretty good.  It's fun to play and I learned a lot for the next build (which I began messing with this evening). Something I'd like to know more about is bolt-on necks. Who's got the goods on how that goes down on a cigar box?

Thanks,

JD

Views: 1360

Reply to This

Replies to This Discussion

drop a line to wichita sam. here on the nation  he sells a tutorial descrbing it very well.  finishing up my first bolt on and am veryy happy with the results, but i know he goes in for surgery tomorrow.

Most of my builds are bolt/screw on neck as I prefer this way. It gives you more adjustment on your guitar and there are quite a few photos on my page  to glean ideas from.

Just yell if you need a particular question answered and I will do my best to help.

Hogs

I don't usually make bolt on's, but I did one where I used a piece of 2x4 pine and secured it to the inside bottom of the box. I screwed the neck to the pine piece and shaped it so that the neck would lie back a bit and help lower the action near the body.

Thanks Hogs,

I'll give them a look.

-JD

HOGS GRUNT said:

Most of my builds are bolt/screw on neck as I prefer this way. It gives you more adjustment on your guitar and there are quite a few photos on my page  to glean ideas from.

Just yell if you need a particular question answered and I will do my best to help.

Hogs

I always attach my necks with screws, 2 or 4 of them...300+ builds and never glued a neck in. It just seems the obvious, easy way to do it, as it gives plenty of opportunity for tinkering with neck angle and action.

I've been using bolt-on necks almost exclusively now.    I have used two methods... For the mandola that's my sig, I used a "furniture insert".   That's a piece that has rough, wood-screw threads on the outside and a hole on the inside with fine machine-screw threads.

You drill a hole in the neck, screw the insert in, and then use a bolt through the body to attach the neck.

 

Easier is "screw-bolts" or "hanger bolts".  These have half the length threaded like a wood screw, and half like a bolt or machine screw.   You screw the wood-screw part into the neck heel, and then use the bolt part through the body to attach using nuts/washers.

i have gone to bolt-on necks - i use the cross dowel method - very solid, although a little more work - using bolt ons you can take the neck off and use it on another box - case in point:  just yesterday i had a customer report that the box on the guitar i had sent him and come apart at one corner (must have been defective box) i told him to ship it back and i'll put the neck on another guitar - i also thing the solidness of the bolt-on contributes to better overall tone

I couldn't agree with you more John.


Hogs.
ChickenboneJohn said:

I always attach my necks with screws, 2 or 4 of them...300+ builds and never glued a neck in. It just seems the obvious, easy way to do it, as it gives plenty of opportunity for tinkering with neck angle and action.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
6 minutes ago
BrianQ. commented on Dar Stellabotta's video
4 hours ago
BrianQ. liked Dar Stellabotta's video
4 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
6 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
6 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
8 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
8 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
9 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
10 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
10 hours ago
A.D.EKER commented on Ricky D's photo
10 hours ago
A.D.EKER commented on A.D.EKER's video
10 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->