So I make the fiddle and the box is too wide and no room to really make a taller bridge. So I need to scallop the side. What are we filling that scallop with?
You need to be a member of Cigar Box Nation to add comments!
This reply was deleted.
So I make the fiddle and the box is too wide and no room to really make a taller bridge. So I need to scallop the side. What are we filling that scallop with?
You need to be a member of Cigar Box Nation to add comments!
Replies
this is great. I think I may take a workshop at Woodcraft in a couple of weeks on dovetail box making might be pretty cool.
Im also thinking about the 40 cbf on the gourd I havent given up yet.
I've used a dovetail jig for boxes before but that skinny box fiddle is a real basic but joint box with strength added by the top and bottom. Still, dovetail and box joint corners look cool and are very strong joints so it's often worth the extra time. Good luck! It's hard to make a halfway decent fiddle!
Here's one with the top and side wedge cutouts that serve the dual soundhole/bow clearance purpose.
Hey Barry, I've used a couple of ways to get that room that the bow needs on the outer strings. One is the waist bout cut out which I think you're calling the scallop. I messaged you about filling that. The other method that works well is to cut out wedges in the top and side. These serve as a combination sound hole and bow clearance area. I'll see if I can get a photo of that to you since I think it's a little tough to visualize. The third thing is to start with a narrow enough box that you don't need to worry with the first two. That's easiest but it's my least favorite since the sound quality of the skinny boxes aren't as good as a wider box. OK I don't know why the same pic keeps posting. I'll try to get the others in a seperate message.