Hey folks, new to the group and to cigar box instrument making, but not to creative homemade instrument making.

I'm building my first cigar box 3 string bass (30 inch scale, most likely) using three 1/2" thick oak pieces laminated together for the neck. Based on what I've read here as long as it's at least an inch thick I should be able to get by without a truss rod.

Looking ahead to the pickup arrangement... I've considered using piezos, but I like the sound of magnetic pickups on bass. Given that it's a three string bass, though, I wonder what pickup I could use. Precision bass pickups have the two and two pole split thing and jazz bass pickups are four poles in a row (or actually, eight poles where the strings align between two poles each).

Now electric guitar pickups are six across, which makes me wonder if I could just use most any six string pickup and maybe the width of the string spacing just might match up in between sets of two poles?

Just how crucial is the pickup pole placement under each string? Has anyone grappled with this?


Views: 1438

Replies to This Discussion

Just about done with this project and starting a new one. If anyone's interested, here's a link to a youtube vid of the (near final) project: 


If you're listening carefully there's a bad buzzing in the strings that I couldn't isolate until yesterday - it was with the bridge having slots too widely cut. That's being fixed now.

Here's a picture of the bass (sans the bridge).

Been tinkering away at a slower pace on the instrument, but this weekend my gf is away and I'm planning to make a lot of progress on the next steps. That will include major sanding, installing the tuning machines and finalizing a tailpiece. Just bought a used scroll saw from craigslist for the occasion.

I debated whether to use a magnetic pickup or piezos. I have chosen piezo disks adhered to the underside of the top lid for pickups, mainly because I bought me some weed trimmer string of the thicker variety (.130", .105" and .95"). Magnetic pickups would need strings with metal content, I think.

I picked up some corian samples for the bridge and nut. I get the impression that the bridge should have as little mass as possible so that the lid of the cigar box receives all the possible vibrations from the strings. Is that true?

If so, should I thin out the bridge as much as possible (with only enough "feet" to keep it standing upright)?


You can also do the bridge like a U shape so only two parts touch the lid. That'll take away mass.

 Find the bottle cap piezo tut if you can (you tube has it) maybe here too.

 Basically you put some hot glue in bottle cap, push piezo down in it. Top it off with glue. The metal cap can rest on the lid (I put mine on the neck and the lid comes down tight on it). Works great.

 *\the glue encasement gets rid of rubbing noises from your arm/box

Murdoc_420, thanks for the tip on the bottlecap piezo. I'd never heard of that. I'm curious how it's different from hot gluing a piezo disk onto the underside of the lid. Does the bottle cap afford more isolation from surface noise?

I did end up fashioning a bridge out of some oak corner molding and it seems to work.I have a working model now of my instrument.


Overall, I'm finding some of the subtler aspects of the project and how they translate into a usable musical instrument.

1) I bought rolls of Gatorline Magnum trimmer line for the strings. Guages .130, .105 and .095. I thought the existence of a reinforced inner core might solve the problem of prolonged stretching. While I do think these trimmer lines are high quality, I'm not sure if it was really necessary. I've eliminated the .130 guage and used the .105 for the low E string and picked up some more standard .080 for the D string. The E is a bit floppy, but I can work with it. Amplified, they sound similar to the Kala U-Bass sound.

I did try stringing a steel commercial bass string onto the box using hand tension and it was very noticably louder. I was going to abandon the trimmer line in favor of commercial strings when I found an insurmountable problem - even though I had set up the scale to be 32" (a compromise between the standard 34" and my 30" short scale jazz bass), the length from the bridge to the tailpiece was longer than any commerical string could handle, even long scale. If I want to go that route, I'll have to modify the whole tailpiece.

2) I've only double-sided-taped the dual piezos into the inside of the box so far and there's a lot of handling/surface noise. The hot-gluing and possible the bottle-cap arrangement Murdoc_420 monetioned may be the way to fix that.

3) I noticed the open A string hardly lacks the fundamental frequency - it sounds like I'm playing a 12th fret harmonic when I pluck it. Is that a property of piezo placement or is it something so inherent in the box design that I won't be able to overcome it?

4) If I make another CBB, I'm going to make it so I can open the box even while there it's strung up. Kinda a gotcha there. I'll also try to make a very slight angle on the neck in order to allow for a higher bridge, and possibly more string tension. Oh yeah, and I'll measure the string length to allow for commercial bass strings (I'm particularly hoping to use Fender 9120 tape-wound strings to emmulate an upright).

This continues to be a fun adventure in music/construction. I'm thinking my next project will be an upright fixed neck 4-string built atop an overturned 5 gallon galvanized garbage can.



The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cigar box a little different

Started by Phil Farabough. Last reply by Phil Farabough Nov 10, 2018. 10 Replies

first bass build

Started by Patrick. Last reply by BrianQ. Nov 8, 2018. 6 Replies

looking for alternate tunings-

Started by Daniel Walter. Last reply by Ken Hutchinson Oct 14, 2017. 16 Replies

Bass build help

Started by Ro'Nique Staley Mar 22, 2017. 0 Replies

My first bass build

Started by Bryan Putnam. Last reply by Richard Haas Dec 2, 2016. 15 Replies

Building my first bass

Started by Henry S. Last reply by TN Twang Nov 30, 2016. 11 Replies

fingerboard question(s)

Started by Euraquilo. Last reply by Fomhorach Nov 1, 2016. 6 Replies

3 string bass questions

Started by Euraquilo. Last reply by Euraquilo Oct 31, 2016. 18 Replies

3 String Cigar Box Bass Guitar Parts

Started by Will T. Last reply by Murdoc_420 Jul 16, 2016. 3 Replies

Bass strings??

Started by jeffrey ross. Last reply by jeffrey ross Mar 25, 2016. 13 Replies

Magnetic vs Piezo pickup

Started by PhilUSAFRet. Last reply by Murdoc_420 Mar 25, 2016. 8 Replies

Weed eater strings and tuning.

Started by Poppy. Last reply by Murdoc_420 Feb 29, 2016. 7 Replies

Bass Uke string question(s)

Started by Lane Martin. Last reply by Where's Uranus? Jan 7, 2016. 6 Replies

Looking for 2 string bass plans

Started by Mike. Last reply by Mike Jan 6, 2016. 8 Replies

UBass strings

Started by Bobby Fields. Last reply by Bobby Fields Dec 11, 2015. 3 Replies

First bass build got a few questions .

Started by Piht Bull (Delta Dawg Guitars). Last reply by Scott aka Farmer Ted Apr 23, 2015. 23 Replies

bass frets...

Started by john mackay. Last reply by john mackay Feb 4, 2015. 4 Replies

Blog Posts

Uncle Enos CBG Banjo Build

Posted by Greg on November 29, 2021 at 7:24pm 0 Comments

To Reach the Chord

Posted by Rich on November 12, 2021 at 10:20am 0 Comments

Seasonal build contest?

Posted by smilingdog1 on October 29, 2021 at 9:20am 9 Comments

Latest Activity

Wade left a comment for Gutbucketeer (Jim Bunch)
"Thanks for fixing the link!"
29 minutes ago
Keith Rearick liked Randy S. Bretz's photo
1 hour ago
Keith Rearick liked AGP #'s photo
1 hour ago
Keith Rearick liked RTZGUITARS's photo
1 hour ago
Keith Rearick commented on Priit Tamm's photo

#23 Shovel

"Looking good."
1 hour ago
Keith Rearick liked Priit Tamm's photo
1 hour ago
Keith Rearick commented on Dale Armstrong's blog post This is my first cigarbox guitar.
"Nice build, and you live in the city of the "King of Cigar Box Guitars"."
1 hour ago
Keith Rearick liked Dale Armstrong's blog post This is my first cigarbox guitar.
1 hour ago
Glenn Kaiser commented on Randy S. Bretz's photo

Assembly day

"I second that WOW! -Glenn"
3 hours ago
Priit Tamm posted a photo

#23 Shovel

Shovel with GDG tuning. Great for sliding and rocking!
3 hours ago
Carl Floyd liked Dale Armstrong's blog post This is my first cigarbox guitar.
4 hours ago
Uncle John commented on Uncle John's video

CB Gitty Throwback Holiday Build Contest Entry.

"Thanks, Belinda.   It is the tale end of building season for me due to cold coming on…"
5 hours ago


© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->