I'm getting ready to build a few Cigar Box Guitars.  I had a run of Kalimbas that I did for my daughters for Christmas and they turned out ok.  Time to step up to a bigger challenge.  I'm going to make about 4 or 5 ( one may be a bit smaller due to the size of the cigar box).  I also plan on making some of the cigar box amps to go with them.  I have been doing a bit of research and I'm thinking of making the guitars with a 22.250 scale and 18 fret due to the box size.  Any thoughts?  Did I mention, I've never played a guitar.

 

Dan

Views: 1440

Reply to This

Replies to This Discussion

Congrats on building a CBG! There are free plans on the site, that's a good place to start. There are no rules. There are lots of ways to get things done. Experiment and see why you like. If you have specific problems/question, then just ask. You'll get lots of answers. Lot's of friendly people here ready to help.
Even if you can't play, that's ok. It's fun to learn! Lots of free lessons and tutorials here and lots on youtube. You can learn at your own pace.

Good luck!

I  got a huge amount of info when i started by looking at all the build photos, focus with one build only at first, you will learn loads from the first build and then progress naturally, i have nearly 50 builds behind me but still learning...!  (-:

 

Dan, as Muddy Creek said, "there are no rules" and with that out of the way remember that the most important non-rule is to have fun. Started building these things almost two years ago and I'm currently working on numbers 19 and 20. Didn't know how to play when I started and still don't do much more than amuse myself making happy noises with them. Take your time, enjoy the journey and experiment as you go along. It's not addictive...Really...You can quit anytime you want to, but you won't really want to.

Thanks everyone, the parts for the builds are starting to come in.  I also decided to build a few of the cigar box amps.  I received a kit from Gitty and put it together in a Nub box.  I want to add a headphone jack, output jack and handle, but so far it's looking pretty good.

I've started working on some headstock designs and tuner layouts for both 3 and 4 string guitars.  I like the contrast of dark and light woods together so I think I will make the headstocks and necks from different woods.  My overall headstock pattern size is 8" long (including a few inches at the bottom for the scarf joint).  Does that sound about right?

Is bending of the neck much of an issue on the 3/4 string guitars?  Do I need to do a glue up for the neck with a center section turned so it's in a quarter sawed direction?

Dan 

Did a bit of work on the headstock shape patterns and turner layout on my cnc today.  I also added and engraved my build name for this endeavor. 

I added a turquoise and coral inlay to the 3 hole fender style head, just to see if it was going to turn out.  What do you think?

Dan

Attachments:

I think you are in a perfect position to create your own distinctive headstock design.

Wow, you own a CNC.  Color me jealous.

I think I need a CNC now....

Well I've been working on the neck and fret board for my 1st build.  This one is an oak neck with a walnut headstock, heal and fret board.  I made a scarf joint on the headstock and neck.  The neck has a slight taper down to the box.  The fret board has been a bit more of a challenge.  I set a file for my cnc to cut it out, but then realized I didn't have any way to hold the piece down while machining.  I decided to cut the frets by hand with a coping saw.  That worked ok, but there is some room for improvement.  The radius for the top of the fret board is 16".  I built a jig for my table saw that rocked side to side to get the radius.

I found another use for my dedicated mortise machine that sits and collects dust most of the time.  This carpet set tool had a 5/8" shaft that fit into the collet with just a little reshaping to make it round.  I also rounded the bottom edge to match my 16" radius fret board.

So that is now your fret press?

Yes Dan, I will probably get more use out of it as a fret press!  Dedicated tools are nice when you have the room for them, but in a cluttered shop like mine it's nice to see it do more than a one trick pony.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray yesterday. 2 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by A.D.EKER Jan 29. 3 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

HELP !! IN VERMONT.

Started by Ranblin' Dan Stevens in Other stuff - off topic, fun stuff, whatever. Last reply by Patrick Kelly Jan 21. 7 Replies

Fat Back Neck

Started by Jim Booth in Building Secrets, Tips, Advice, Discussion. Last reply by Jim Booth Dec 15, 2023. 7 Replies

Brick House CBG

Started by Ian Boyd in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Dec 13, 2023. 3 Replies

Best power tool for building?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Dec 11, 2023. 10 Replies

Latest Activity

Southern Ray replied to Chance's discussion Building with vintage paper/pressed board cigar boxes.
" Jon,  Use the HTML Editor at the top right of the posting window.  Cheers!"
6 hours ago
Southern Ray liked Uncle Toad's video
6 hours ago
Southern Ray commented on Uncle Toad's video
Thumbnail

Gotham epoxied-in rod piezo demo - no squeeze

" Sounds great! I'd like to thank you for this, since I just bought a license plate from…"
6 hours ago
Southern Ray replied to Southern Ray's discussion Camera suggestions?
" Thanks for those tips. They'll be quite helpful. I'll look up…"
6 hours ago
BrianQ. commented on AGP #'s photo
Thumbnail

AGP #523 -''Clean Machine''

"Squealed & squawked? As in feedback? "
6 hours ago
jon neet replied to Chance's discussion Building with vintage paper/pressed board cigar boxes.
7 hours ago
jon neet replied to Chance's discussion Building with vintage paper/pressed board cigar boxes.
7 hours ago
jon neet replied to Chance's discussion Building with vintage paper/pressed board cigar boxes.
7 hours ago
AGP # posted photos
9 hours ago
Uncle John commented on Uncle John's photo
Thumbnail

Travellin' mood.

"LOL, Alan.  Sounds good.  No, Andries, it is not mine.  It is from a railroad museum…"
14 hours ago
A.D.EKER commented on Uncle John's photo
Thumbnail

Travellin' mood.

"Are you Going  to make a speaker box or a drum suitcase !? or just a visit to the famely ?…"
15 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

BCB Dulcimer 2024

"Thank you AGP# for the like on the new build !"
15 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->