Replies to This Discussion

Permalink Reply by Br Harold F Stubbs III on February 21, 2018 at 12:00pm

Or if you're feeling saucy you could cut off the end of the power supply and solder that directly in.. but the above is better, and maybe you can find the part cheap or salvage from something broken / old / spare.

• ▶ Reply

Permalink Reply by Paul W. McGuire on February 21, 2018 at 12:14pm

I’m going to take parts off and old pedal

• ▶ Reply

Permalink Reply by Paul W. McGuire on February 21, 2018 at 1:20pm

I found this pic on the Gitty web site.

• ▶ Reply

Permalink Reply by Paul W. McGuire on February 21, 2018 at 3:20pm

Wes, what would I use that port for?

• ▶ Reply

Permalink Reply by Jerry Jordan on February 22, 2018 at 1:12am

The simple way to do this is just to cut the end off the wall wart cable and solder it to a 9V battery clip.,,.make sure you pay attention to the polarity of the 9V.,.,then you can just connect the 2 battery clips together.,.,the one from the amp and the one from the wall wart.,.,

• ▶ Reply