Doing my first Concert Uke for my niece and got the Concert bone nut from CBGitty. But I'm using a 1/4" fret board and it is too short to just butt up against the end of the fret board. I need to figure out how deep to notch the board.

Thanks,

Russ

Views: 246

Reply to This

Replies to This Discussion

Hi, make a dummie nut that gives the string height you want resting on top of the fingerboard , you could even slot it, then match that nut to the bone one. What's below your dummie/test nut is the amount to recess. To be on the safe side leave the bone nut a bit higher than neaded to allow for fine tuning once glued in place.
Just a thought.
Taff

You don't want to notch the board, you want the nut high enough that the strings don't rest on the first fret...  Ukes normally use really thin fretboards... you can shim the nut, my guess is you'll need close to 1/8"...

The way I'm reading you, your plan was to have the nut against the end of the fretboard, making the end of the f/board the nut position, but your nut is not high enough to do this. If that's the case, and you have not fretted your board yet, yes it is ok to do it like Taffy says, and just move your frets along to suit, if the board is already fretted, you only have 2 choices, either shim the nut like John suggested, or get a taller blank. All of the above is directed at a case where your fretboard finishes at, or before the nut. Just realised, I'm assuming as well that the fretboard is already glued down, if not, you can do it either way.

Thanks for the ideas guys. I have a piece of 1/4" red oak I was going to use for the fret board but I may go looking for a 1/8" piece.

I have not cut the slots or glued it up to the neck yet. Still in the planning stage. The box and neck have been test fitted. Need to shape and smooth the neck. Will order the frets and tuners in the next day or so. Thinking of going with the narrow frets.

Russ

Russell, that being the case, all you need to worry about is making sure the nut ends up higher than the frets, once they are fitted, then you can trim your nut to suit the frets and bridge, and on that, Taffy's idea of making a test nut out of scrap is the easy way to go, get that right, and working well, then just copy it to your Gitty nut so any mistakes are just on a bit of wood.

For that matter, on Ukes I often use a piece of hardwood for the nut . . . 

Maybe I should use a zero fret and be done with it LOL, So anyone have a suggested string height at the nut? Or the first fret?

For a good low action, fret height at the nut works best, if you feel that's too low, a tiny amount higher than the frets will be enough, remember, after leaving the nut, the strings rise to the bridge, clearing the frets, but if your fretboard and frets are not level and straight, you could have a problem with buzzing, that is why it is nice to have a bit of fudge room at the nut, so you can lower it as needed

1/4 inch thick fretboard is quite normal. If you use 1/8 thick  and you'll cut the the board slotting it. 

I was wondering if it would cut through the 1/8" board. CBGitty does not give the fret board thickness on the fret boards they sell but the pics show the concert size nut in their kit. Pretty good pic in the kit instructions. It's not really a big deal but it would be nice to be able to place the nut at the end of the fret board.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
1 hour ago
BrianQ. commented on Dar Stellabotta's video
5 hours ago
BrianQ. liked Dar Stellabotta's video
5 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
8 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
8 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
9 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
9 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
11 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
11 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
12 hours ago
A.D.EKER commented on Ricky D's photo
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->