Replies to This Discussion

Permalink Reply by JP Lace Master on March 1, 2017 at 11:04pm

I would be remiss in my duty if I were not to inform you that the teddy bears head is at the tail end of the guitar and currently has a hinge bolted onto it.

• ▶ Reply

Permalink Reply by JP Lace Master on March 1, 2017 at 11:16pm

Here are the pics I promised, As you can see, me and my router had a few disagreements whilst I worked on the headstock

• ▶ Reply

Permalink Reply by JL on March 2, 2017 at 3:13am

an egalitarian teddy bear, particularistic, ridged, and not flexible. Not fun, cannot see humor, and overall, unpleasant. (safe for work euphemisms, lol) sorry, sorry, sorry

• ▶ Reply

Permalink Reply by JP Lace Master on March 2, 2017 at 6:52am

despite the body shape, it works rather nicely actually, its very playable and sounds very good, If you can see, the eyes have been drilled out and serve as sound holes, tiny body, surprising amount of noise.

• ▶ Reply

Permalink Reply by JL on March 3, 2017 at 1:45am

Its beautiful and can't wait for a sound-clip.  I was just being funny about the anatomical position of the neck entering the tin bwahaha.

• ▶ Reply

Permalink Reply by JP Lace Master on March 3, 2017 at 11:29am

I am aware of how it looks on that front and to some extent it is a little funny look at, doesn't change the fact that it is quite awesome.

Can't do a sound clip, problems with mic and amp to laptop recording. I can say this, I'm not sure whether its down to the extended scale length on the break angle of the strings, but it has almost a sitar tone to it. very light twang, but very thick at the same time.

• ▶ Reply

Permalink Reply by JP Lace Master on March 3, 2017 at 10:53pm

I have found that tins are great resonators, but they serve well for the electrics as well. as well as serving as great mounting points for everything needed, they work as a perfect faraday cage for any interference.

• ▶ Reply