Cheapest Motorized Fret Slots Cutting Aid (Drill-Driven Fret Slotter)

OK people here it is, the cheapest motorized  fret slots cutting aid ever, but I have to give the concept credit to Izzy Swan…

 

As you can see I took an electric 3/8” drill, used a compressor fitting, male to female to increase the size to 1/2”.

Grinded the little notch off so it would fit in the drill better. The reason why I needed to do this was the blade has a 1/2” hole.

The blade is what is a jeweler slotting blade and I ordered it off EBay:  

HSS Jewelers Saw 3" D x .023" W x 1/2" Hole X 230 Teeth Made in Poland, http://www.ebay.com/usr/toolmexonlineoutlet

I really would have liked a 4” blade but the asking prices I found or the shipping costs were ridiculous. I didn’t use sealed bearings as shown on Izzy’s video because I didn’t have any but I did use plastic spacer with 1/2” inside diameter (Lowes) and put a washer on the outside of each one, might have to replace these in the future.

As you can tell the table is pretty rough, scraps I had laying around, wasn’t sure it was going to work, I had to slightly shim the table support to get just the right height of the blade for fret slots. I kept the table away from the drill for 2 reasons, one was to get to the trigger and the other is where the table height is not too high because of the height of the drill.

Cut my first fret board, oak, as you can see.

Views: 4711

Attachments:

Reply to This

Replies to This Discussion

Great idea. I've been eyeing the table saw idea, would like to do something with a small bandsaw too.

I edited your article so the pictures & video were displayed.  We're featuring it this week.  GREAT IDEA!!!

This is pretty cool, but I find that a coping saw is the simplest easiest way to cut the fret board.

Gerald, I have never been able to use a coping saw for anything....
Time and patience. Take the blade down until the top is flush with the fret board. The fret fits perfectly into the slot. It's slower. But I like to build with as much hand tools as possible.

Izzy makes some pretty cool stuff, been following him awhile now. I use the scroll saw to cut fret slots the blade is perfect size, so quick and easy.

Hey Pat, I thought about using the scroll saw, but when a blade breaks it scares the crap out of me.....

I keep the saw on a slow speed, reverse the blade so the teeth face away from me, that way it is easy to see the cut line, and let the blade do the cut with very little pressure use the guide to keep the board square, practice on some scrap you'll find it very easy, don't over tighten the saw blade, it should be about a c note when you give the blade a twang. 

Very nice! I've got that blade ordered but I think I'll spring for a $50 mini table saw and just leave it set up for fretting. Thanks for the info!

Awesome Job. Izzy Swan is awesome. ThX for sharing this.

I was gonna add, that I bought the mini table saw from HF it has NO torque. I even had issues cutting scrap pine for fret slots.Oak it would maybe get half or 3/4 of a slot cut and had to finish with a hand saw. I was using the same blade as mentioned above. $5 off ebay. it works well when you have the power behind it. If it had torque it would be an awesome tool for fret slotting for the cost it was. But I had to return it. In the demo video by HF they are cutting balsa wood and Popsicle sticks.

I'll be building one of these since a drill will have the torque to handle this.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
11 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
11 hours ago
Kent Thurston updated their profile
11 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
12 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
12 hours ago
Poorness Studios liked A.D.EKER's video
14 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
14 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
17 hours ago
A.D.EKER commented on A.D.EKER's video
20 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
20 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->