Comment

Comment by Uncle John on June 16, 2018 at 5:07am

All four are winners.  I like to use the bottoms some times.  It is hard to cut into those tops.  I had a nice Brick House that I ruined cutting for a mag pup.

Comment by Don Craig on June 16, 2018 at 2:35am

Ah now I get it, thanks Bones, I've seen your work, very nice, didn't know it was called that.  I have everything but a small table scroll saw.  So I picked up the remainder 17 boxes this morning, I'll post them later.

Comment by Jeff 'Bones' Reilly on June 16, 2018 at 12:48am

here’s a pic I use my scroll saw to cut out the piece I desired to use and glue it to a post of timber 1/4” shorter than depth of box glue on the sound hole to the top of timber post and Bobs your uncle walla dropped sound hole I even set up a light behind the soundhole to give it a cool event there’s a video on my page about the light version . Hope this helps . 

Comment by Don Craig on June 16, 2018 at 12:13am

If you have a picture of dropped sound holes, can you show it here?

Comment by Don Craig on June 16, 2018 at 12:09am

Dropped sound holes?  You mean on the bottom side?

Comment by Dave Lynas on June 15, 2018 at 10:44pm

Bones dropped sound holes would look good too. Especially the Brick House and  the 18.

Comment by Jeff 'Bones' Reilly on June 15, 2018 at 3:05pm

Dropped sound hole looks effective ....... 

Comment by Don Craig on June 15, 2018 at 12:27pm

Good idea, Dave, thanks.

Comment by Dave Lynas on June 15, 2018 at 11:04am

Tops up. Wicked Buckers and side sound holes.

Comment by Don Craig on June 15, 2018 at 9:46am

Thanks guys, I'll take your advice and keep the art work on top where it belongs, will try not to butcher it up too bad.  The art is a main attraction to show off.  I'll be back there first thing tomorrow to see what else he has.

• ‹ Previous
• 1
• 2
• Next ›
• Page