Comment

Comment by Uncle John on April 22, 2014 at 6:16am

Thanks, guys.

Comment by Bad Finger (Eric) on April 22, 2014 at 2:11am

I'm going to test using one of my Elmar 3 string Flatpups on the 4-string "pissinator" guitar, Grumpy Old Git.  It will only take a bit of tape to try out and see if it works OK or not.

Comment by Maddog on April 22, 2014 at 2:06am

It turned out real nice John!

Sometimes builds that we finish just sit.......well wrong with a guy. I have some that I have built and I will play them and they just don't sound/feel right so I put them down. Then pick them up months later and low and behold.....they still don't feel right. Out comes the hammer and saw and they go thru a transformation, most times they are better.

I liked the first build you had the Elmar on but with the bowing neck issue it forced your hand to do something different, you did very well with this one!

Comment by Uncle John on April 21, 2014 at 4:04am

Thanks, John and Duck.   Duck, you are right.  I needs no name.

Comment by Thomas "Duck" Petry on April 21, 2014 at 2:59am

Call it whatever you want, that's a beautiful build!

Comment by John Toomey on April 20, 2014 at 8:37pm

very nice

Comment by Uncle John on April 20, 2014 at 12:26pm

Silent that's pretty good.   

Comment by Uncle John on April 20, 2014 at 9:02am

Thanks Eric.  I like it more the more I look at it or play it.  

Comment by Bad Finger (Eric) on April 20, 2014 at 8:44am

Beautiful, uncle John!