has anyone ever had any luck with hanger wire frets? tired a test run with some scrap wood and wasn't really happy with the turn out. even with wood glue/crazy glue i didn't think they'd hold out will with any playing, let alone aggresive playing. if theres a better way to do this, i'm not seeing it.

Views: 890

Reply to This

Replies to This Discussion

I'd think steel nails would work better; copper's just too soft for aggressive slide.
the hanger i cut up was steel, and i figured it would be easyer to work with, as cutting nails tend to take a lot of time. what do you use to hold the nails in?
finish brad nails from a air compressed nail gun work great! they are already half round , galvenized and can be filed easily
nice, thanks otis, i'll look into 'em.
Grease,
I use galvanized finishing nails, cut a fret groove, then epoxy 'em into the groove.
right on man, thx Oily! as soon as i get some extra cash, i'll experiment with that.

I found a very nice material at a hobby shop that caters to the model-airplane crowd.  They had a whole rack of small-scale metal bits, including very fine brass rod stock and tubing ranging from about 1/8" down to 1/16".

You can get enough to make an average guitar neck for just a few bucks.... Easier to cut than steel nails and dead straight.

right on mark, thats something i'll keep in mind as well. there has to be a model plane shop around here somewhere. thx man!
 I've used the the brass rods Mark speaks of on 4 or 5 builds .  I've super glued them in then covered the fretboard with polyurethane to help keep them in.  I've always have to tweak them quite a bit to get them all level with each other and often re glue frets back in when, or add glue, after adjusting them or filing them.....before covering the neck with polyurethane. When done the brass rods work very well and look like "real frets".   That being said I now ,when ever possible, use REAL FRETS .  They ARE MUCH EASIER to work with.  I then cover the fret board with tung oil when done .  The tung oil makes the fret board feel like silk compared to polyurethane .       On my next rustic build I am considering useing staples, one underneath each string , as "Wade"......?  ,on this site, has done .        
I used 3/8 inch cotter pins. the brass ones and the zinc coated ones are the easiest to cut. the stainless steel ones are really hard to cut.

I sawed in a shallow trench with my miter saw and set the cotter pin on the trench.

but, yes, "real" fretwire is much easier to work with, and gives a more consistent result. and you can get it in brass/gold tone, too.
thanks Sharecropper and Diane! i'd prefer to use real frets, but'll cash is tight at the moment, i was diggin around looking for scraps. thats for the tip about the tung oil as well sharecropper, i'm new to woodworking. just did a fretless neck with a coat of poly on it. it turned out well but i did notice is has a "sticky" touch to it.
not to hijack this thread or anything, but here's a good follow up question... what do you think is the best glue/ epoxy for attaching makeshift wire frets to the fret board?

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Busking Songs...

Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Wednesday. 7 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Moritz Voegeli and Matthias Bichsel are now friends
3 hours ago
David L. replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
"I have found these are…"
3 hours ago
J. D. Woods replied to J. D. Woods's discussion Are metal frets necessary?
3 hours ago
Doug Thorsvik posted a video

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
4 hours ago
Southern Ray commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

" I was gonna say, "Sweeeeeeeeeet" as well, but that was taken. Very nice. I too love…"
10 hours ago
Southern Ray replied to J. D. Woods's discussion Are metal frets necessary?
" Any other questions, just ask. "
11 hours ago
Southern Ray replied to J. D. Woods's discussion Are metal frets necessary?
" Hello JD, welcome. I'm a fifty year failed six-string player that got into building and…"
11 hours ago
BrianQ. replied to J. D. Woods's discussion Are metal frets necessary?
14 hours ago
Doug Thorsvik commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Burn baby burn! Top looks hot Crazed; sporty headstock too. Excellent build."
14 hours ago
Doug Thorsvik commented on Ghostbuttons's photo
Thumbnail

Four projects

"You are a busy guy Warren! Outstanding builds and each one unique; well done."
14 hours ago
AGP # commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

""Sweeeeeeeeet", love the burning on the Body, have a Build on the Bench at the moment,…"
15 hours ago
AGP # liked Crazed Fandango's photo
15 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->