Hello all of you knowledgeable instrument builders,

After building three four string guitars, a three string guitar, an eight string mandolin, an ukulele, and a diddley bow I feel ready to graduate to building a six string.

The only problem is that I'll need a truss rod for that and I do not have any power tools (except for a drill). So how do I cut a straight and even truss rod groove without a router?

Any suggestions?

My only idea so far is to make a three part laminate neck with the middle part the same width as the square metal rod I want to use as a nonadjustable truss rod. Something like the sketch below.

Do you think that would work? Has anybody done this successfully?

Thanks!

Views: 5923

Reply to This

Replies to This Discussion

I've built 15 guitars. I don't use truss rods. I bury a length of 1/2" square tube in the neck. None of them have moved yet.

If there is a high school in your area that has a wood shop, ask the teacher if someone could rout out your neck for a truss rod.  You could offer to give a talk on what you are doing.  There might even be students who would be interested in building cigar box guitars.  I think most shop teachers would be interested in community involvement.  

You can get double-action adjustable truss rods quite cheaply on Ebay.

Although I routed out the slot on my 6-string, from the rear, I don't see any reason why you couldn't laminate a neck around the truss rod.

Access to the adjustment screw is via an Allen key through a hole in the front of the headstock.

Tim

It'll work with two pieces (2) as well, can be done with a dovetail saw, regular or Japanese... For a smaller builds a cross-grain laminate (1) is more than enough...

You sir are correct, cross grain laminate is strong enough to leave out the metal bar,., but I guess this thread is about installing a bar...

Well, you could always redneck it and chuck your drill in a vice, zip-tie the trigger and run it by hand under the bit. may not be perfect, but aint that kinda the point of a CBG?

Hi, Just done this job today and it fits in with this thread, so I thought I would post my process.

The finger board was off due to the neck bowing up, so after straightening the neck I hand cut the slot sides with hand saws and chiselled out the waste  to fit the reinforcement infill. I made a depth gauge out of brass to fit the 1/16 chisel so I could scrape the bottom of the slot flat and level.

Easy peazy. Taff

I suppose you could use a chisel, then fill the trough with epoxy for a tight fit?

Inspired by this thread I've just completed a neck for a 'normal' 6-string guitar, using an adjustable truss rod within a laminated neck.

The guitar had yet to be completed, but it looks OK so far!

Tim

I taped little bits of card to the top of the rod to increases its apparent depth. This allowed me to true up the top of the neck with a little bit of leeway.

An access hole for the 4mm Allen key for adjustment.

#

Hi Tim, that all looks good, but an observation if I may. I feel it would be more beneficial to use a wood infill on top of the rod. Over time the cardboard is liable to compress and leave you with a loose rod. Also the rod is then pushing against the fingerboard and not, maybe, the air gaps.

Just a thought Taff

My fault Taffy,

I did remove the bits of card prior to gluing it all together.

Any rattles can be eliminated by adding a little bit of tension to the rod.

Tim

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
12 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
12 hours ago
Kent Thurston updated their profile
13 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
14 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
14 hours ago
Poorness Studios liked A.D.EKER's video
16 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
18 hours ago
A.D.EKER commented on A.D.EKER's video
22 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
22 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->