I've got this great little slide top box that I want to use to make an electric guitar.  The obvious problem is that if I mount pots and pickups, I can't slide the top back on.

My plan is to just shave off the lip at one end of the top and then just slip the other lip in and lay the top down into the box.  This way I lay it down in position and there's no sliding needed.  A couple of supports inside the box will hold it up where the lip was shaved off.

Are there other ways to address this?  What have y'all done in this situation?

Thanks,

Scotty

Views: 335

Attachments:

Reply to This

Replies to This Discussion

You could remove, then re-glue the "bottom" of the box.  Or, cut a large rectangular hole on the side, to clear for "the slide" of the lid, then glue/screw on a decorative cover plate out of wood, or metal.  I like your idea, though.  Once side in the lip, the other side with 2 little screws, and you're good to go!

Yeah.  I figured I'd glue two block to the underside of the lid so I can run the screws in from the bottom and leave the top unmolested. 

Though I probably could just sneak things in through the pickup hole.  A little creative fishing around in there and I might be able to get the the volume pot and output jack into place.  Hmmm...  Though it better be right the first time.  I certainly wouldn't want to chase a loose connection!

Side mount volume and a neck mounted pickup are both good ideas!  Solves a lot of problems. It’s a short box so no problems on pickup placemen there.  I was already considering a through neck, makes for a very uncluttered bridge.

That is exactly what I have done... I leave an inch of lip left...  go for it!

I mounted a Gitty "Teisco Del Rey" surface mount pickup inside a cigar box box. Had enough juice to pick up vibrations through the lid. I cut a thin notch in the through-neck to position the p'up @ 1/4" below the underside of the box lid. Glued two small wings to the neck to mount the p'up. Worked for me. I wired the pickup to a jack, no controls onboard, preserved a beautiful box top. You could, of course, wire the pickup to onboard vol/tone pots. Nice box you have, look forward to the finished build.

I just remembered when I was in the shop last night, I ordered some skull and crossbones knobs for this build, so I may still put the volume control on the lid just for looks.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
1 hour ago
BrianQ. commented on Dar Stellabotta's video
6 hours ago
BrianQ. liked Dar Stellabotta's video
6 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
8 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
8 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
10 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
10 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
11 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
12 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
12 hours ago
A.D.EKER commented on Ricky D's photo
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->