just built my first CBG with lots of help from my hubby.  My problem is in tuning- keep breaking strings when trying to get it up to the correct note.  Double checked string size to note I want, should be able to do it but can feel way too much tension on the tuner as I try to get up to the proper note.  I'm trying to get to GDG.  My question is this - since I am not playing with a group, can I tune to any 1 - 5 -1 setting such as EBE and still use GDG chord chart and music written for GDG?  Obviously I need to address the breaking strings issue but I want to take a breather and just play for a little while.

Views: 350

Replies to This Discussion

You can play all the same chord shapes and the scales will be the same in any 151 tuning I think, Sharon. Obviously the chord names and notes on the frets will be different but I think you should be good to go.

As for the string breakage, check the break angle of the strings over the nut and bridge (make sure the angle of the strings going over the none vibrating side isn't too drastic) and check the tuning pegs for burrs and sharpness that may be cutting the strings.

I'm sure others will be along soon who can help more or correct me if I'm wrong but I believe this info to be right. 

Enjoy the guitar :)

Yes, Dani and Bear are correct that any 151 tuning allows you to use the same chord shapes and tab. EBe just means you'll be in the key of E rather than G which you'd have with GDg. I usually like a low G tuning and I use the A,D,and g strings from a 6 string set. This means that the D and g strings are at their normal pitch and the A string is tuned down a step to G. I suspect you may be trying for an octave higher than you should. You can check that using an online guitar tuner to match the pitch of your g and D strings and then the low G will be one octave lower than the higher g.

https://www.guitarforbeginners.com/onlinetuner.html

I too have broken strings tuningmy cigar box guitar.  It turns out I was tuning them an octave too high and using light gauge strings didn’t help as they broke easier.  I switched to medium gauge strings, got a tuner I could clip on my head stock, and more importantly, I tuned it using one of my six string guitars to get the correct octave,  a piano or other instrument that is guaranteed to be in tune is also good to use.  Tuning to GDG is preferable so you can learn songs from videos from the cigar box nation, youtube, etc..

Thanks for the quick replies.  Think I will be changing out the bridge and nut but for now I'm satisfied with the lower tuning!  Really pleased with the build as far as sound.  Want to get it to the GDG tuning but was fun to just get to play!

Another member has recently post the exact same dilemma, he too sounds like tuning to the next octave.Like the others said, you can tune to any 151, I too like the EBe sound, plus guess what, capo the 3rd fret and "voila" GDg

Quick update- my husband readdressed my guitar's issues- changed out the nut to a traditional bone one.   Was able to tune up to GDG and get it intonated.  I'm one happy strummer!  Will post a pic as soon as I trim the strings.  Thanks for all your help and advice.

Glad that you managed to get it resolved Sharon. Good on hubby for sticking with it through to the solution too. Have a great time on your guitar and looking forward to seeing the pictures.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

Moritz Voegeli and Matthias Bichsel are now friends
55 minutes ago
David L. replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
"I have found these are…"
1 hour ago
J. D. Woods replied to J. D. Woods's discussion Are metal frets necessary?
1 hour ago
Doug Thorsvik posted a video

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
1 hour ago
Southern Ray commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

" I was gonna say, "Sweeeeeeeeeet" as well, but that was taken. Very nice. I too love…"
8 hours ago
Southern Ray replied to J. D. Woods's discussion Are metal frets necessary?
" Any other questions, just ask. "
8 hours ago
Southern Ray replied to J. D. Woods's discussion Are metal frets necessary?
" Hello JD, welcome. I'm a fifty year failed six-string player that got into building and…"
8 hours ago
BrianQ. replied to J. D. Woods's discussion Are metal frets necessary?
12 hours ago
Doug Thorsvik commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Burn baby burn! Top looks hot Crazed; sporty headstock too. Excellent build."
12 hours ago
Doug Thorsvik commented on Ghostbuttons's photo
Thumbnail

Four projects

"You are a busy guy Warren! Outstanding builds and each one unique; well done."
12 hours ago
AGP # commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

""Sweeeeeeeeet", love the burning on the Body, have a Build on the Bench at the moment,…"
13 hours ago
AGP # liked Crazed Fandango's photo
13 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->