Replies to This Discussion

Permalink Reply by Tom T on January 8, 2018 at 10:24am

Forget about the first fret distance for a moment. Instead, carefully measure from the edge of the nut to the 12th fret. Twice that measurement is your scale length (where the bridge should go).

If your 30 Cm measurement is correct, that translates to 11.811". Double that and you have 23.622" (or 23 5/8") total scale length.

Once you have the bridge positioned and the strings tuned, you can check to see that the note is exactly one octave above the open note. Move the bridge slightly until it is and you're good to go.

The 12th fret is always the key to determining scale length.

• ▶ Reply

Permalink Reply by Richard Dean on January 8, 2018 at 10:35am

I think the important thing here is to remeasure, too many conflicting measurements

• ▶ Reply

Permalink Reply by Tom T on January 8, 2018 at 11:22am

I think Richard hit things on the head.

If the nut to 12th is 11.7/8" then the scale would be 23 3/4" for that scale length, the first fret would be 33.86 mm from the nut (call it 34 mm). A careful re-check and you may find that the actual nut to 1st fret is close to 34mm.

In any case you are close enough that you can put the bridge at 23 3/4" then tune and check intonation at the 12th to find the final position of the bridge.

You're almost home.

• ▶ Reply

Permalink Reply by Taffy Evans on January 8, 2018 at 11:29am

Hi, the easy way as mentioned by Tom, remember to measure from the inside edge of the nut to the string contact point on the saddle, or from the centre of a zero nut to the same point on the saddle.

Also the amount of compensation varies depending on string gauge and/or string height.

Cheers Taff

• ▶ Reply