How I Attach a Lid to a Cigar Box Guitar for Best Acoustic Response - by Shane Speal

You've shaped the neck, cut the soundholes and put all those glorious electronics inside.  Now it's time to attach the lid to the box!

In the video below, I show the simple way that I attach the lid.  As you can see, I prefer to use "drop in lid" cigar boxes that feature a simple flat lid. 

Scroll down for a bonus video on installing my favorite preamp.    

Views: 2022

Reply to This

Replies to This Discussion

Hi Shane

You guys over there in the US seem to have an inexhaustible supply of poplar for your necks; we in the UK do not. However, I have found an excellent source of oak, iroko and mahogany, pre-rounded at the back, 35mm wide, 20mm deep. Perfect! But what's the best way- no, what's your way of carving out from a hardwood through-neck the bits between the tailpiece and the bridge, and the bridge and the other end of the box. I must have missed that video...

Hoping you can help- Wal

I notch it out using my table saw.  I'd do a video on it, but I'm currently writing a book about building these things and my publisher is asking me to save the big building tips for the book.

So I could wait for the book... Thing is, i take a rather empirical approach to CBG building, started with no tools at all, and now have one or two. And nowhere to work, not even a bench. When is the book out? Actual paper, or ethereal and web-based? Ah well, at least I can get shaped oak for about a dollar a foot...

Yep, actual book.  One of the biggest woodworking book publishers in the US.  A mix of DIY plans and cigar box guitar history, all from a musician's perspective

Boss!! Can't wait to buy a copy.

I use my bandsaw

Great tips Shane.

Shane,

How do you put the screws into the edge of the sides of the box without them splitting?

very carefully!

Drill pilot holes.

Wal, Glen Watt has several videos on techniques (here on CB Nation, Youtube) to notch out neck blanks to fit inside of the box. Hand saw, chisel, hammer, rasp. More labor, less tool investment. I use a table saw or a band saw, because I have them. There are no steps to building a CBG that cannot be done with hand tools. Power tools make many steps quicker, often more precise, but you can build without them. Better, I think, to start with minimal tools, take your time, and get goin'!  We have seen videos in here where guys make gits using tree limbs, gas/oil cans, and kitchen knives. Then play them. It can be done with what you have.

Good points, well made. My first 'real' CBG saw me cut a strip 11" long and just a quarter inch thick lengthwise along an oak neck using just a blunt tenon saw and a sharp eye. Couldn't believe how muck work it was- or how well it turned out. What was cut out is pretty much veneer quality, and it will get used in a future build.

What I really lack is an actual work bench. Even crappy tools need a stable surface, and I haven't got one. My wife tells me there will be one under the Xmas tree, however... Meanwhile, the second 'real' CBG will appear in the photo library today- watch this space!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
32 minutes ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
1 hour ago
A.D.EKER commented on Ricky D's photo
1 hour ago
A.D.EKER commented on A.D.EKER's video
1 hour ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked A.D.EKER's video
5 hours ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->