So I really like the idea of taking non-musical parts and making a musical instrument, or at the very least, making the part yourself.  Using machine heads is sort of like cheating to me and sort of kills the spirit of "this something I threw together with crap I found in my garage."  

 

Thanks. 

Views: 16999

Reply to This

Replies to This Discussion

I just happen to have laying around, a band saw, table saw, benchtop sanding station, drill press, machine heads, and peg shaver & reamer, so any itch can be scratched....

I came up with a solution using dowels as a simple tuner.  The screw at the base end pulls it tight to the headstock and it stays in tune.  I sprinkled salt in the recess for friction.  This design works very well!

Another design using a dowel and block of wood - which doesn't work as well to keep tune.  You can't tell in the pic, but I tapered the dowel on my belt sander to try to make it sit tight when pushed in the hole.

 I mostly make serious instruments, many for gigging and recording, and usually use tuning machines.  As an alternative, zither pins also work well.  

These images are from an album named Headstock Designs - 80 pics of different headstock styles I've created-  on my page at my site Handmade Music Clubhouse ..  

I tried anchor bolts and nuts for a bass/baritone git. Never again, too much hassle and grief.

People in back in the day used whatever they had because they couldn't afford it, today parts are easily had for cheap. So why bother? Want to go as primal as you can? Cut your own wood from a tree, use some nails for frets, screws for keys and cut the wire from a few old brooms for strings. Then I'll be impressed. LOL

Same here with the anchor bolts, real pain in the as..., but, that being said, one day I want to find a real old(100yrs maybe) cigar box(will probably have to spend too much) and build a primal looking 3 string fretless, and might steal this design idea if that's ok Ted when I do, it will most likely be a wall hangar piece of art, recreation of the past sorta thing and I think this tuner idea would fit the bill.

But as far as building for either selling or playing, I'll stick with conventional machine heads. I understand some people enjoy making these instruments from gathered parts.

I used to have a didley bow I made, I used a wood shims, the kind used for installing doors etc, under the bridge and I could fine tune to pitch by moving the shims under the bridge making the string slightly tighter/looser. The string was anchored on each end with a deck screw, so the screws would set the basic tuning, then fine tune with the shims.

That is cool, you just gave me a slightly different idea for making separate adjustment saddles for a 3 string

Nice to have a bottle with that kind of edge for a bridge and your shim to pitch idea is ingenious.

Now I am impressed Bluesheart. LOL

Those are dowels epoxied into cigar mouthpieces and inset with BBs! I real bear to work with but they hold well. I made a T wrench out of copper pipe with vinyl tubing inside because thet are hard to turn with fingers only.

Here is a 2-string fele with torsion tuners, that I've built. They work quite well. I use a flower stick instead of a bow.

https://www.youtube.com/watch?v=u15n5XgQ4fs


RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->