Finally finished my 3 string CBB. What a learning curve! Started with a 20" long bulk cigar box, built a steel rod reinforced red oak and mahogany neck, through the box, corian nut, jumbo frets, and laid it out for a 30 1/2" scale. So far, so good. Oops, even long scale bass strings won't run from the tail ferrules to the tuners. Drat! Muddled my mind through various redesigns - from a hard tail bridge (top just too thin), to a shorter scale (nope), to starting over with a different box (not a quitter!). Ended up buying some "take off" stand up bass strings, .105/.085/.065. Plenty long! Had to open up the slot in the 105's bass tuner peg, but it went in. O.K., we're back in the game! Built a bridge from a 1/8" scrap of birch plywood, mounted a skeleton key, filed in three string slots, and tuned 'er up. Oh oh. Not loud enough! Pulled 'er apart, installed a three piezo harness and jack, screwed 'er together again and Bang! It's good! adjusted the bridge to intonate, and I can play on. Success! Nice easy playing flat wound strings, easy on the old fingers. An awesome experience, with some interesting challenges to keep Grandpa's mind sharper..or at lest less dull. Uncle Tommy is coming over tomorrow, and we'll start on his. I believe the first build's hiccups will make numbers 2 and 3 go much smoother, but we'll see. Uncle Tommy is older than me! We'll probably find some ways to go to head scratchin' on them, too.

Views: 376

Attachments:

Reply to This

Replies to This Discussion

Very cool! Nice save with the stand up bass strings.

Thanks Kigar. The next ones, I'll lay out the strings, scale, tuners, and tailpiece before we start cutting wood!

Very nice. Love the Skull motif and the paint. I'd love to hear it played with a CBG. I'll stay tuned for the video. Very nice job!

Sweet looking base, maybe one day I'll tackle making one, on a side note, using plywood for the bridge in lieu of hardwood might be the reason for some of the volume lost acoustically, wood that sandwiched together like that probably absorbs a heck of a lot of the vibration from the strings

Thanks Richard. Good tip on the bridge. If I need wood on the next ones I'll use some red oak. Lord knows, I have a pounds of scraps around the garage.

plus oak and cherry are easily found in pallets, along with a few other hardwoods

Beautiful.

You might consider a trapeze  tail piece so you don't use up 1/4 of the string between the bridge and the anchor point, like a orchestral bass uses.

Oh, I went there, JL. I bought a fine Chinese bass guitar trapeze tailpiece. But....it was just a hair too long. It was just about butted up to the bridge, as I laid out the scale length to the bridge. Upon setting the bridge to intonate the strings, the bridge moved forward enough to allow the trapeze to be used, but by then the die was cast. I'll use the trapeze on the next build. Thanks for the tip!

I was thinking about the metal ones Gitty sells, I'm thinking its easy enough to string one as a flying trapeze instead of bending it for a solid mount tail...

Very nice Grandpa and if anybody gives you grief, you can wack em with it.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->