Hey y'all, so when I started fretting I went with a StewMac fretsaw which does a fantastic job. But I have chronic hand/wrist issues, and the labor of hand cutting the slots leaves me hurting. I watched a bunch of videos a while back and saw one on cutting fret slots with a scroll saw with the blade flipped to the back. I've tried that with my scroll saw (Craftsman), and it does work. Yay! But my scroll saw blades are actually too narrow! I have to pound the living crap out of the frets to get the tang in or actually go back over the slots by hand with my StewMac fretsaw to widen them a bit. Boo! I want to get a thicker blade for the scroll saw, but I'm really confused in looking at the blades online. I don't know what to get. The StewMac fretsaw is 0.023" thick. I've looked for scroll saw blades that are 0.020 to 0.022" thick, and I'm having trouble finding one.
Can anyone share a product number for a scroll saw blade that works for you for cutting fret slots? Pretty please??
It's funny - when I tried cutting fret slots with my scroll saw I thought surely it would cut the slot too wide, or crooked, or too deep, or something. I never expected it to make beautiful, straight slots at a great depth but too narrow to seat a medium fret! Now I'm all confused trying to understand the designations on the scroll saw blade dimensions to find one the right thickness.
I don't have a table saw and I don't have one in my near future, so getting the StewMac table saw fret blade isn't an option for reducing my hand labor. Those are really sweet (and pricey)! Just not in my cards.
Here's the video that inspired me. It does work with my scroll saw (really nice, clean slots), but I need help finding a thicker blade. Any help will be greatly appreciated!
Not sure if I should have posted this question in a specific topic area?
Thank you!
Tags:
I'm not in the states Janis, so i can't help you with suppliers, but, i would say you will be able to get a blade with a .023 blade, as mine came new with one, if all else fails, you can get a saw doctor to widen the kerf a bit, or even try yourself with the blade prices being so low, it is fiddly work, and your condition might make it difficult, but basically, you just bend each tooth a tiny amount 1 left then 1 right for the length of your blade, it will be a very, very small amount, but if you do bend too far, you can easily close it again with pliers or a light tap with a hammer
Darryl, thank you for the info on widening the kerf. It's good to know that's an option. It's also good to know there are blades out there since you have one. :) I just need to keep looking.
A lot of them have a designation for 'wide' and 'thick'. With the widths being in the hundredths of an inch (say 0.03") and thicknesses also in the hundredths, I'm unclear what these 2 measurements are. I was thinking I need to look for thickness designation to be 0.023", but I'm not sure.
I just had a quick look, i suspect these are too long for your saw, [ 11"], but it gives you some idea what to look for, the 0.023" is 23 thousandths of an inch kerf width, length and depth will always be a fair bit larger---------https://www.amazon.com/Olson-DT43300-0-011-Inch-Double-Scroll/dp/B0...
These are what i use in my saw Janis, my saw takes pin ended blades, .5 mm is just nice for gitty's fret wire-----https://www.ebay.com.au/itm/Scroll-Saw-Blades-Pinned-Ends-German-Ma...
Do you think these specs would work? The designations I'm finding here in the US are different. Unfortunately this particular one is plain end, and I also need pin end.
https://www.woodcraft.com/products/olson-44002-universal-scroll-saw...
hmmm, I have a pretty old craftsman scroll saw I use for fret cutting, and my blades seem to work well for thickness, I have a pack of blades, let me find my calipers to mic them up to see what thickness they are. I could always just throw one in an envelope and mail it to ya. I'm about to cut some medium frets, last ones I cut were jumbo, I'll let you know how they work, maybe different fret manufactures, different thickness too. These are pin type blades also
Oh man, Richard, any help on identifying your blades would be awesome! I was searching more this morning, and for the actual Craftsman blades I can't find thickness info. I've been using the medium, medium fretwire from C.B. Gitty (jumbo for the zero fret but only for that).
Pretty sure they''ll be fine
I think I found one that works! Craftsman 29441
Hope so, can't find my calipers at the moment
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray yesterday. 1 Reply 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Mar 2. 6 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies 4 Likes
Started by Brad in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Feb 19. 6 Replies 3 Likes
Started by Jacob Shook in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 16. 10 Replies 0 Likes
Started by Southern Ray in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Feb 16. 2 Replies 0 Likes
Started by Skeesix in Performances, How to Play, Lessons, Concerts. Last reply by Skeesix Feb 6. 2 Replies 1 Like
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Steve M Jan 31. 9 Replies 0 Likes
Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies 0 Likes
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
Posted by billy jones bluez on February 8, 2024 at 4:05pm 0 Comments 0 Likes
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!