So, I have been building Cigar Box Guitars, Canjos, Dulcijos,and Diddley Bows for a few years now. I wanted to try my hand at a Ukulele.

I found a tenor uke maple neck with a pre-fretted rosewood fretboard for cheap. I bought an actual bone nut and bridge with a rosewood saddle. I bought generic set of nylon uke strings.

I bolted on the neck, glued the fretboard, and put it all together with dual piezos under the bridge, a jack and volume pot.

I can not get the strings to tune to GCEA (mainly getting the high string to A). The tension is to high getting it to F (let alone A) I am not sure the problem.

Also, I filed the nut and bridge. Intonation is now close (less than a quarter step sharp at 12th compared to harmonic). Harmonics are dead on, but first fret is off (as if strings are still too high and I am fretting them sharp). I'm afraid to go too low. The strings rest about 3cm above the fretboard at the first fret and about 5cm at the 12th fret.

Any assistance and advice would be great. Gitty and others in YouTube make this look so easy (especially for someone like myself who this isn't my first CBG build). It went together rather easily/quickly, but isn't quite what it seems.

Views: 409

Replies to This Discussion

A) check they are not soprano strings

B) buy some expensive strings, strings affect the sound quality on ukulele way more than you would think

C) lower the nut.  you can always put a shim under it.

D) good luck

Agree with Kalmario on all points. Even brand name strings are maybe $6. Definitely get tenor length and watch the g string as it can be high or low especially for tenors.

I've only used Aguila nygut strings because my  (store bought) ukes stay in tune a lot longer.  Let me know how the pre-built tenor neck works out.  I'm leaning toward buying several for Christmas present builds for my grandchildren.  Got them some Oscar Schmitt concert ukes a couple of years ago.

Thanks everyone. It will probably be later in the week before I can get to the music store for some strings. But I will be sure to post back here how things work out as soon as I can. 

Ok, I finally got to the store earlier this week and bout some Aquila strings. The strange thing is that I can't get the larger C string to tune up to that. It doesn't seem to want to stretch.

The other issue I have is fret buzz when fretting the first fret (and only first fret). I imagine that has something to do with the nut (which I will probably try replacing). It's a bone nut, but doesn't seem to be working well with this build.

My edits didn't save from this morning. I currently have the strings tuned GECA, which sounds fine, but I have to form certain chords with that in mind.

As far as the fret buzz, it's mainly for the highest A string, though the others still buzz (they just aren't nearly as noticeable when fretting and strumming). 

The buzz shouldn't be the nut, when fretting it is out of the picture.  It is probably touching the next fret or another close by. If you lay a straight edge on them you could see if one is high or low.

Never used that tuning, only the standard gCEA,  For the C string, the strings match your scale length, right?

Yes, I built a Tenor and that's what these strings were for. Scale length is spot on at 17 inches from nut to bridge. I think the fret buzz is caused by the height of the nut. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Ukes For Gand kids

Started by Rupe Power. Last reply by Sal Monella Nov 11, 2022. 3 Replies

Gitaulele

Started by Brown Water Jerry (Rice). Last reply by Kigar Mar 21, 2020. 1 Reply

Semi-Uke Kit Build

Started by Brian Revels. Last reply by Brian Revels Oct 6, 2017. 8 Replies

ideal narrow of the box?

Started by jose garcia paredes. Last reply by Kigar Sep 3, 2017. 3 Replies

Steel string advice sought for a chronic head scratcher (me)

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Bob Johnston May 1, 2017. 10 Replies

(CB) U bass help

Started by Kigar. Last reply by Ronald Whitford Apr 6, 2017. 1 Reply

Cigar Box Ukulele group on Facebook

Started by Kentucky Mojo Jan 31, 2017. 0 Replies

Classical Ball end strings

Started by John Hopper Dec 30, 2016. 0 Replies

String choices: nylon vs. steel

Started by Lane Martin. Last reply by gary sheldon Dec 3, 2016. 5 Replies

MDF Box Ukes

Started by Scott W. Last reply by Kentucky Mojo Nov 4, 2016. 7 Replies

My Brothers Christmas Present

Started by George Fitzgibbon. Last reply by George Fitzgibbon Oct 26, 2016. 6 Replies

CBU Avo Uvezian Tenor Uke

Started by Kigar. Last reply by Greg Thompson Jul 8, 2016. 5 Replies

Triangular Concert Uke

Started by Kigar. Last reply by Greg Thompson Jul 8, 2016. 4 Replies

First Build

Started by B. Kirkwood. Last reply by B. Kirkwood Apr 13, 2016. 2 Replies

Assembly Order

Started by B. Kirkwood. Last reply by B. Kirkwood Mar 29, 2016. 3 Replies

Neck length

Started by B. Kirkwood. Last reply by gary sheldon Mar 29, 2016. 3 Replies

reversed tuners on a uke - advise wanted

Started by Kigar. Last reply by gary sheldon Feb 23, 2016. 3 Replies

New to Uke!!

Started by jeffrey ross. Last reply by Habanera Hal Feb 17, 2016. 19 Replies

Great little video!

Started by Wade. Last reply by rusty case Feb 7, 2016. 2 Replies

Fretboard attachment

Started by gary sheldon. Last reply by rusty case Feb 7, 2016. 3 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->