This could be git related or not. So, what's on your workbench at the moment?

I have 4 scarf joint necks in different stages of work.

A 25" scale pine 5 string neck for a Banjo-Res, A 25" scale Red Oak neck for my 6 string Strat-Res build, A 24 & 1/2" scale Red Oak neck for my 6 string Double Cut Tele build and a 27" scale 6 string Baritone Conversion neck for a Modern Strat body I have.

Views: 30898

Attachments:

Reply to This

Replies to This Discussion

I may put a Footnote 5watt amp in that cabinet and run the speakers in parallel.

I have a 1957 Motorola tube amp from a turntable that I can covert to a Marshall 18 later. I'll probably use the reverb tank from the Crate with it.

Started on another yesterday. Still loads to do but coming along nicely
Attachments:

Like the headstock design. Why are the fret slots beveled on the fingerboard?

thanks Paul, its kinda been my go to headstock design for the last few builds. its nice and simple but looks really cool. The fret slots are slightly beveled as i intend to use finishing nails again for the frets (despite saying never again after the first experiment. the bevel will hopefully allow the nails to sit a little better after being glued down. 

Working on a diddley stick
Attachments:

You got some nice looking gits on the wall.

Thanks mate having a lot of fun .

Today I worked on some pickups. I had to remove 2 old pickups from my Bass Reso build because it turn the entire tin into a pickup. Result wasn't good. Pic of the pickups.

One pickup was just a single coil with 2 magnets in a standard HB housing that was half dilapidated. I put it into a plastic Dogear P90 cover that I had. It only reads at 5.75 DCR, so it would make a decent neck pickup. I arranged the Firebird sized magnets on each side of the pickup poles like a P90 has.

The other pickup is a true standard size double coil humbucker in a metallic cover(material unknown) and a brass base plate. It has screw poles on one side and slug poles on the other. One signal/+ wire surrounded wire wire mesh for shield and ground.

The strange - It has 2 Alnico magnets(unknown strength) that are Firebird size. One magnet is flat against the screw poles and the other is on it's side against the first magnet and touching the slug poles. Usually they just use one magnet, Why 2? Another strange thing is the pickup only has a 5.32 DCR. Maybe this pickup was supposed to emulate a Filtertron sound? IDK Weird  

Update on my Crate amp.

I thought about converting it into a 18watt style Marshall tube amp, but that would require buying a speaker or two to fit the cabinet. I have a 15" speaker in a cabinet that I made out of the kick drum shell and a chassis that I can use for that. So what to do with the Crate cabinet and speakers?

I had built my self built and designed dual 386 chip bridged amp (1watt) into a small tin that was a bit flimsy. So I put that into the Crate cabinet using the Crate speakers. Works and sounds great. Sorry for the blurry pic.

I finally got my parts from China... Almost 6 weeks of waiting, and I only got 5 of the 9 parts I ordered. Just so happens, it was the other 4 parts I needed to make my stand up 2 string thump bass and super diddley (Bass pickups and bass tuning machines). Sigh. I'm so hoping a 2nd box o' parts shows up like magic this week...

I think I'm going to ask my friend for a large wooden Blood Oath Bourbon box he has, and make a 3 or 4 string humbucker resonator using the stuff I did get.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
4 hours ago
BrianQ. liked Dar Stellabotta's video
4 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
6 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
6 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
8 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
8 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
9 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
10 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
10 hours ago
A.D.EKER commented on Ricky D's photo
10 hours ago
A.D.EKER commented on A.D.EKER's video
10 hours ago
Keith Rearick liked Doug Thorsvik's video
14 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->