Replies to This Discussion

Permalink Reply by Paul Craig on May 21, 2017 at 8:09am

No problem. I had to use the angle grinder because the pie server was thick. The spatula you showed looked thin enough for some metal shears. Angle grinders can be had for cheap prices these days, but they can be dangerous too.

Be sure to ask any questions, we're here to help. Post pics when your done.

• ▶ Reply

Permalink Reply by J.D. on May 21, 2017 at 11:53am

Alright I appreciate it Paul & will definitely share a pic when I get it finished. Thanks again.

• ▶ Reply

Permalink Reply by Grandpa on May 22, 2017 at 10:51am

Hey JD. I saw that your build has a bolt on neck. Did you end up with that tee-shirt neck we talked about last year? The one on Amazon? Looking forward to seeing your build.

• ▶ Reply

Permalink Reply by J.D. on May 23, 2017 at 2:50pm

No Grandpa ,I actually built that neck and it just runs to the back of the inside of the box. Of course I used a couple blocks for support, but Im going to try the bolt on neck we talked about.

• ▶ Reply

Permalink Reply by Tim Fleischer on May 23, 2017 at 2:06pm

Mine was a cheap find...like $3 from the thrift store. It is pretty heavy gauge though. I also cut it down some. It works great!!!

• ▶ Reply

Permalink Reply by J.D. on May 23, 2017 at 2:47pm

Yeah that turned out nice. Thanks for sharing! Great job on the build ,love that neck

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page