I know this has been covered somewhere, but can't find exactly what I am looking for. I am a newbie maker. I am currently making a 4-string CBG from a Tabak wooden box. I am doing a neck-thru and wanting to mix a piezo buzzer with a homemade pickup I made.
The pickup I made is basically two very strong hard-drive magnets wrapped in copper wire (about 600 wraps or so), then placed into a steel Altoids tin I modified to look like a mini-humbucker (will take a pic and post as soon as I can if needed). I don't have any pole pieces in that I was looking for the top of the Altoids tin (bottom depending on your perspective) to be magnetized and act as one flat "pole piece".
I wired it to an input jack, plugged it in to a small Crate amp, and hung it inside an acoustic guitar to try seeing what it would pickup on. It didn't seem to work. So I am wondering if I HAVE to have pole pieces and if I need to redesign my pickup?
My biggest fear is cutting a slot for the pickup in my lid, wiring it up, and then it not work. I'd have to scrap the box then since my single-coil "mini-bucker" and an actual pickup I have from an old Fender are totally different sizes.
Any help would be much appreciated!
Tags:
30 gague wire has 1 ohm per foot, 600 winds is probably in the neighborhood of 100 feet, so your multimeter should register about 100 ohms between your hot and earth lead out wires.
I think your problem is " I left one magnet attached to it, removed the plate from the other magnet and just snapped it ontop of the other"
the poles on those magnets are at the ends. Letting them snap together themselves means you have the N of one and the S of the other against each other. the fields are going just between the magnets and not out to your strings.
remove the second magnet, one of these should be enough.
multi-magnet pickups have to have all the N poles pointing the same direction so as to not cancel each other out, which can be hard to force them to do since they tend to repell each other that way.
Stacking magnets shouldn't be a problem. Each magnet has different pole on each side, so stacking a south pole(south on top north on bottom) on top of another south pole would be north on bottom of first attracting to south on top of the other that has north on it's bottom. So result would be S-N-S-N. Effectively becoming one magnet that's the same as a single magnet with South on top and North on bottom.
stacking magnets pole to pole does make a bigger magnet, but these are bar magnets with the poles at the ends stacked side to side. to make it a bigger magnet they need to be end-to-end like linked sausages. stack them side they cancel because they have both a N and a S pole sticking out the same end of the coil.
Gottcha. So would the use of a compass to determine the poles on the sides and then spinning the magnet around to match the side poles work?
Maybe that would work, but it's a lot of trouble using multiple magnets stacked and better off using one magnet that's strong enough. you can always use a strong magnet to strengthen a weaker one, but that takes careful alignment of poles and time.
I've been trying to strengthen some polymer magnets that I've stacked together to make a DeArmond Gold Foil type pickup for a month now. Not working well so far.
For Brian, the hard drive magnets are plenty strong, use only 1.
for Paul I suspect those polymer magnets may have the poles somewhere other than you think.
for example, the craft store ceramic disk magnets for making your own refrigerator magnets have the poles to the sides of the disk, not to the faces.
A cheap cracker jack toy compass is all you would need to help you sort that out.
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods yesterday. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray on Monday. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies 4 Likes
Started by Brad in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Feb 19. 6 Replies 3 Likes
Started by Jacob Shook in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 16. 10 Replies 0 Likes
Started by Southern Ray in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Feb 16. 2 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!