I know this has been covered somewhere, but can't find exactly what I am looking for.  I am a newbie maker.  I am currently making a 4-string CBG from a Tabak wooden box.  I am doing a neck-thru and wanting to mix a piezo buzzer with a homemade pickup I made.

The pickup I made is basically two very strong hard-drive magnets wrapped in copper wire (about 600 wraps or so), then placed into a steel Altoids tin I modified to look like a mini-humbucker (will take a pic and post as soon as I can if needed). I don't have any pole pieces in that I was looking for the top of the Altoids tin (bottom depending on your perspective) to be magnetized and act as one flat "pole piece".

I wired it to an input jack, plugged it in to a small Crate amp, and hung it inside an acoustic guitar to try seeing what it would pickup on.  It didn't seem to work.  So I am wondering if I HAVE to have pole pieces and if I need to redesign my pickup?

My biggest fear is cutting a slot for the pickup in my lid, wiring it up, and then it not work. I'd have to scrap the box then since my single-coil "mini-bucker" and an actual pickup I have from an old Fender are totally different sizes.

Any help would be much appreciated!

Views: 1574

Reply to This

Replies to This Discussion

30 gague wire has 1 ohm per foot, 600 winds is probably in the neighborhood of 100 feet, so your multimeter should register about 100 ohms between your hot and earth lead out wires.

I think your problem is " I left one magnet attached to it, removed the plate from the other magnet and just snapped it ontop of the other"

the poles on those magnets are at the ends. Letting them snap together themselves means you have the N of one and the S of the other against each other. the fields are going just between the magnets and not out to your strings.

remove the second magnet, one of these should be enough. 

multi-magnet pickups have to have all the N poles pointing the same direction so as to not cancel each other out, which can be hard to force them to do since they tend to repell each other that way.

Stacking magnets shouldn't be a problem. Each magnet has different pole on each side, so stacking a south pole(south on top north on bottom) on top of another south pole would be north on bottom of first attracting to south on top of the other that has north on it's bottom. So result would be S-N-S-N. Effectively becoming one magnet that's the same as a single magnet with South on top and North on bottom.

stacking magnets pole to pole does make a bigger magnet, but these are bar magnets with the poles at the ends stacked side to side.  to make it a bigger magnet they need to be end-to-end like linked sausages.  stack them side they cancel because they have both a N and a S pole sticking out the same end of the coil.

Gottcha. So would the use of a compass to determine the poles on the sides and then spinning the magnet around to match the side poles work?

Maybe that would work, but it's a lot of trouble using multiple magnets stacked and better off using one magnet that's strong enough. you can always use a strong magnet to strengthen a weaker one, but that takes careful alignment of poles and time.

I've been trying to strengthen some polymer magnets that I've stacked together to make a DeArmond Gold Foil type pickup for a month now. Not working well so far.

For Brian, the hard drive magnets are plenty strong, use only 1.

for Paul I suspect those polymer magnets may have the poles somewhere other than you think.

for example, the craft store ceramic disk magnets for making your own refrigerator magnets have the poles to the sides of the disk, not to the faces.

A cheap cracker jack toy compass is all you would need to help you sort that out. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

smilingdog1 commented on 3 String Blues's video
1 hour ago
smilingdog1 liked 3 String Blues's video
1 hour ago
smilingdog1 liked Glenn Kaiser's video
1 hour ago
Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
3 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
19 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
19 hours ago
Kent Thurston updated their profile
20 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
21 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
21 hours ago
Poorness Studios liked A.D.EKER's video
23 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
23 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->