Replies to This Discussion

Permalink Reply by Cause the Blue rat on March 18, 2017 at 5:55pm

I know, it's not a guitar. But I made something!  It's a watercolor paper stricture for a 12 X 16 in sheet. This is actually my second try. First was a complete failure. There will have to be a third. Didn't take into account that the paper swells in size when it's soaked. So I'll have to more the bolts back a bit to accommodate.

• ▶ Reply

Permalink Reply by Paul Craig on March 19, 2017 at 8:11am

Very interesting and helpful.

• ▶ Reply

Permalink Reply by Cause the Blue rat on March 19, 2017 at 9:30am

Stretcher idea is a success!!!! I did a second sheet. Cut this one down by 1/4 inch on a long and short side. This gave plenty of room. The Arches 140 lb cold press paper was soaked for 10 minutes. Placed on the stretcher and allowed to dry. I then heavily soaked one half. Like you would for a wet on wet painting. Let it dry. There was no buckling. Not wile the paper was wet or when dry. This next shot is after the wet on wet soaking had dried. Love that flat paper. Now all I need to do is learn how to paint... : )

The final design will still have a raised painting area of 11 X 15. The bolts will be farther out. Instead of cutting a 7/16 slot for each bolt I'll be using wood strips to hold them in place. ( done so they can't move when you tighten the wing nuts. ) Capped off by a strip that will keep the bolts from falling out. This strip will be held in place with screws. And have the rubber feet. If needed I'll be able to unscrew these strips and replace a stripped bolt.  Below is a drawing of the structure holding the bolts in place.

Now I need to get to a few CBGs.

• ▶ Reply

Permalink Reply by Timothy Hunter on March 20, 2017 at 12:59am

have a look at this guy. Frank Clarke. he is irish and does Simply Painting. teaches watercolour with the simple tenant of "Have Some More Fun" a mnemonic for Horizon then Sky then Middle then Foreground.tried my hand at it many years ago now with marginal success . i play guitar better than i paint... not saying much.. 

http://simplypainting.com/index.htm   has free video lessons and a youtube channel

• ▶ Reply

Permalink Reply by Dee Ann on March 19, 2017 at 11:29pm

That is pretty cool.

• ▶ Reply

Permalink Reply by Fomhorach on March 19, 2017 at 11:49pm

Whats on my bench? Absolutely Fk all..  and its doing my head in.

• ▶ Reply

Permalink Reply by Paul Craig on March 20, 2017 at 7:45am

I'm in the middle of re-purposing a 1957 Motorola HIFI Turntable's tube amp innards into a guitar and bass amp. A project that will take some time. I got this thing in a yard sale for 20 bucks.

The turntable (didn't work) came with a 15" speaker that was damaged. I fixed the speaker(8ohm 20watt Jensen) with masking tape and superglue, not pretty but functional.

I have a kick drum shell(22") that I found on the curbside that I've decided to use as a speaker cabinet. I'll post pics soon.

• ▶ Reply

Permalink Reply by Paul Craig on April 11, 2017 at 8:01am

Found a worktable on the curbside. So what's on my workbench is my new worktable.

• ▶ Reply

Permalink Reply by Paul Craig on April 11, 2017 at 8:03am

With the rain today, the only work getting done is washing off the dirt, cobwebs, spiderwebs and egg sacks.

• ▶ Reply

Permalink Reply by Paul Craig on April 11, 2017 at 11:08am

I got a heater coil unit from a old dryer and decided to make a simple spring reverb effect out of it. I took it apart and had to remove the coils because they were too brittle. I made a coil assembly out of the springs from the dryer door. This works well for reverb. I need to add a couple piezos and a pot for level/drive and it'll be fantastic. Sorry for the blurry pics, I have a crappy camera.

• ▶ Reply

Permalink Reply by Lane Martin on April 21, 2017 at 2:38am

So there's this oil can (which may or may not be sold to fund more guitar parts), some bearings soaking in alcohol after being "rescued" by my youngest from some old rollerblades (to be made into a spinner, he says). Two paint can lids for this month's contest build(s), a heart-shaped tin for a uke, Spam can for a diddly bow, various bottle caps for pot knobs, etc. In the window are various cans to become canjos of some design.Oh, and the Christmas tin below the bench for another build, and a canvas bag atop that full of old church keys for string retainers or whatever.

• ▶ Reply

Permalink Reply by Paul Craig on April 21, 2017 at 7:48am

Great find Lane, thanks for posting.

Keep posting guy's and gal's.

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• 4
• 5
• …
• 187
• Next ›
• Page