I've built with piezo's and mag's. Getting ready to experiment with them as a combo. I would like some opinions on sound, piezo placement, tone / vol. control and switching and anything else that might be useful.

The Woodwisher

Views: 507

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by James "Jam" Ruddell on March 11, 2017 at 5:41pm
I also use the same circuit for an input preamp on my cigar box amplifiers if I am going to run bass mid and treble controls to limit the loss of volume and have had good luck with it
Comment by Ted Smith on March 11, 2017 at 4:34pm
Sorry that last comment was for Davod. Thanks again!
Comment by Ted Smith on March 11, 2017 at 4:32pm
Man that's some good stuff. I really appreciate it. That's a good looking rig in your profile pic. I see your using a railblaster humbucker pup. I've been using them on several recent builds. Using a switch for split coil. I like them!
Comment by David L. on March 11, 2017 at 1:59pm
For those interested this is where I first came across the idea of using diodes
https://www.strat-talk.com/threads/the-stracciatella-3-volume-w-var...

And a video demo from the person who thought of the idea (I think - the original link seems to be broken).
https://www.youtube.com/watch?v=vWJeR_O5p44
Comment by David L. on March 11, 2017 at 1:49pm
For wiring diagrams this artec sound PDF offers the common schematics. If you want to add a piezo just wire it in place of one of the magnetic pickups in the diagram.
http://www.artecsound.com/wiring/wiring_book01.pdf
Comment by David L. on March 11, 2017 at 1:43pm
Hi Ted,
On nearly all my CBGs I add both piezos and magnetic pickups. This is an old video I made comparing piezo discs and magnetic pickups with and without a preamp. Note the sound is very low (old camera mic) so turn the volume up on your device and if it lets you on the video window too.
http://www.cigarboxnation.com/video/comparing-cbg-pickups
On this box guitar I used a 5 way switch with the piezos (two or more wired in parallel) wired to where the bridge pickup would be on a stratocaster 3 pickup wiring diagram.
If I use an onboard preamp I just send the signal from both piezo and magnetic through the same preamp input.
Since this was made I have tried using a blend switch but find it doesn't work as well as I hoped (magnetic tends to over power the piezo signal as previously mentioned).
Now I use diodes (1N5819 type - look on eBay and you can get 50 for £1). If you give each pickup a volume pot and put a single diode on the hot output lug of the pot (usually the middle lug) you can add as much of each pickup signal as you want (including for example neck magnetic, bridge magnetic and piezos) which offers great tonal options. Note diodes are polarity specific with the shaded end pointing away from the potentiometer lug.
As to position of the piezo
Discs two - under the lid slightly back on either side of the bridge, glue brass side to the lid and smother with silicone or hot glue to help reduce feedback.
Rods - has to be under the bridge saddle as it needs the string pressure to transduce properly
Cable - under the bridge saddle but really needs a preamp as very weak signal.
I have also added disc piezos underneath hardtail bridges on solid body guitars (drill a shallow hole for enough discs to sit in to fill across the width of the hardtail bridge), I mount them brass side to hardtail so notch out where the solder blobs are located in the wood under the bridge so they lie flat. I then wire them in parallel. Mounted like this they sound as good as the mahgnetic pickups.
Regards,
David L
Comment by James "Jam" Ruddell on March 9, 2017 at 3:42pm
Yeah this is where I found it http://music-electronics-forum.com/t23807/
Comment by Ted Smith on March 9, 2017 at 1:09pm
Thanks Daryl, that helps. Appreciate the info.

Hey James is that 9v circuit on line somewhere I can have a look?
Comment by darryl kernaghan on March 9, 2017 at 12:38pm

Ted, if you go with separate volume controls for piezo and mag pups, you can blend in your piezo to the mag sound and get some good results, the piezo is, in effect, a capacitor, so you get a bit of tone control, to counter any problem like James mentions, just add a diode to the piezo hot wire to stop the signal returning, hope this helps

Comment by James "Jam" Ruddell on March 9, 2017 at 11:53am
I have a schematic for a 9v piezo pre-amp circuit. I happened across it (from a past blog un CBN ) when I first started using piezo's , it was one of the thing's that convinced me to join .

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
3 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
3 hours ago
BrianQ. commented on Dar Stellabotta's video
7 hours ago
BrianQ. liked Dar Stellabotta's video
8 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
10 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
10 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
11 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
12 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
13 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
13 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
14 hours ago
A.D.EKER commented on Ricky D's photo
14 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->