Hey people, I was looking at purchasing the steward macdonald router base for my dremel tool for doing fretboard inlays.The biggest brad point drill bit I can find is 3.2mm and I just ordered some 6mm round fretboard inlays, can I do this with my fremel tool, or am I going to need a drill press?

Cheers

Brett

Views: 1920

Reply to This

Replies to This Discussion

For rounds, yes. I would use a 15/64" bit and a drill press, using a pointed punch to mark the spot. i would use a drill if careful but a drill press is better. Wrap some tape several times around the depth you want to act as a depth guage. Better to leave the inlay a tiny bit high and sand down level after gluing.
Don
I've been using a 1/4" highspeed router bit that I flattened the bottom of in a drill press. It works but I have been thinking about a system that would add more flexibility (like for diamond shapes). Here is what I am putting together using a plunge router base on a dremel. It involves creating a template that spans over the fretboard with sides on top and bottom like in this drawing.

Using a burr style of cutter the shaft will follow the shape. You simply set the depth of cut and let the burr do the work. What I don't like about brad point drill bits is that you do not end up with a completely flat bottomed hole. The router solution solved that part for me but locked me into one size round mother of pearl dot. I am currently working on my next build and am shopping for MOP shapes to try this with. Lowes has the plunge router base for the dremel tool, so I'll need to pick that up. Stew Mac has a good selection of burrs for this type of work.
I was thinking if something like this would work?
http://busybeetools.com/earchive/newsletter/newsletter07/article.htm
Cheers Ron.
Thanks guys, Don I hadn't thought of a router bit, I found a drill press for $99 might be a more accurate solution.

Brett
Thanks for posting the link.
Bob:)

Mungo Park said:
I was thinking if something like this would work?
http://busybeetools.com/earchive/newsletter/newsletter07/article.htm
Cheers Ron.
Ron I cant find the router inlay kit on the busybeetools website, do they sell them?

Brett

Mungo Park said:
I was thinking if something like this would work?
http://busybeetools.com/earchive/newsletter/newsletter07/article.htm
Cheers Ron.
If you're trying to choose between buying a router base or a drill press, I would buy a drill press first. I use the drill press way more than the dremel router base. (Unless you think you're going to be getting into fancy inlay work.)

For this project, any 6mm drill bit will work for the round MOP inlays. The bottom doesn't necessarily have to be flat. Just press them in and put a little thin super glue around the edges and let it soak in. Or use epoxy. They will never come back out.

And like Don says - a little high is better than a little low. You can practice on a scrap piece of wood to get the right depth worked out beforehand.
Good advice thanks, inlays are a bit scary when you haven't done them before, the only think fancy that I liked were the star inlays and maybe some ACDC lightning bolts.

Cheers

Brett

Skeesix said:
If you're trying to choose between buying a router base or a drill press, I would buy a drill press first. I use the drill press way more than the dremel router base. (Unless you think you're going to be getting into fancy inlay work.)

For this project, any 6mm drill bit will work for the round MOP inlays. The bottom doesn't necessarily have to be flat. Just press them in and put a little thin super glue around the edges and let it soak in. Or use epoxy. They will never come back out.

And like Don says - a little high is better than a little low. You can practice on a scrap piece of wood to get the right depth worked out beforehand.
Used pearl dots for the first time. Used drill press to make holes, Elmer's white glue. Let glue dry, sand flush. No problem.
Attachments:

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"thanks kale !yup that shaker sure keeps the groove going , and this LACE is my fender in the CBG…"
3 hours ago
AGP # liked Ghostbuttons's photo
4 hours ago
AGP # commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"A while in the making, But!, well worth the wait, another outstanding one off Randy Bretz Build,…"
4 hours ago
AGP # liked Randy S. Bretz's photo
4 hours ago
AGP # liked Dar Stellabotta's video
4 hours ago
Randy S. Bretz posted a photo

Off the Bench !

Top neck - 23" 018p,028,038 / Bottom neck - 28" 018p,030,044,056.
5 hours ago
BrianQ. commented on Dar Stellabotta's video
Thumbnail

Wooden Guitar Slides from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Demo!!!!

"They actually sound great, but I like the fact that they won’t break if you drop em! "
8 hours ago
Carl Floyd liked Moritz Voegeli's discussion Joseph J. Rogowski about Current Based Pickup Design
10 hours ago
A.D.EKER commented on Dar Stellabotta's video
Thumbnail

Wooden Guitar Slides from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Demo!!!!

"Great Sliding ! But to be honest i dont hear that much a differens,  beleave the Glass is a…"
15 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"thanks AGP;# ! much appriciated !"
15 hours ago
Crazed Fandango added a discussion to the group Introduce Yourself!
Thumbnail

Better late than never...

After joining this forum in 2014, I finally have my 1st CBG which my wife bought for me at the…See More
18 hours ago
Bernie Edwards liked J. D. Woods's photo
18 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->