Started by Tim Pannabecker. Last reply by Paul Craig Nov 1, 2019. 18 Replies 0 Likes
Ive been looking for data for a baritone build. I have read a 26.67” scale helps to define the guitar as baritone. Before I get down to this, I wondered if I could get the parameters, is scale…Continue
Started by Paul Craig. Last reply by Paul Craig Jun 7, 2019. 28 Replies 0 Likes
I got a large cookie tin from my mother in law(4" x 12" x 9") and decided to do a resonator bass without frets.Thinking about using a Uke type strip Piezo, P Bass Pickups, 3-way switch, 250k volume…Continue
Started by Donny Bell. Last reply by Reg Seward Mar 31, 2018. 2 Replies 3 Likes
I just wanted to share my latest build - a 7-string acoustic baritone using an Undercrown Shade cigar box. 27" scale, piezo pickup, and Fishman preamp.…Continue
Started by Adam Crofts. Last reply by William J Russell Oct 22, 2015. 2 Replies 1 Like
Hi all,I just joined up and am looking forward to building some instruments! I thought I might start with a 3 or 4 string baritone strung with strings for a Fender bass VI (or Jaguar Baritone). Any…Continue
Comment
I will be following along.
I am about to embark on making a Baritone resonator with a 27.5" scale, or maybe just 27". I will fashion the box from Sapele planks somehow, fit a pick-up of some devious design and have at it...... I have made a few other CBG's but this is the first resonator with a long neck, specifically for slide usage...!!! 15cm cone assembly
Thanks Blind Lemon Chello, I like yours too.
Just look on the thread "Short Scale Resonator Bass Build" in the discussion forum. On the last page at the bottom is the last pics I took. Just needs strings and a bridge.
Just joined the group. I came into possession of a 12" x 9" x 4" cookie tin and had some thick square table legs. So my plan is to build a 30" short scale Bass Resonator with 4 strings, a strip piezo for ukes and a P Bass pup.
I'll start a build thread soon.
Hi all.
Just finished my 5th build. I decided to double two Corojo No5s and string it up with the bottom 3 of a standard git set. I tuned it to D-A-D (a 4th below standard CBG tuning).
It sounds great. But I don't know what to call it. It doesn't have the short length of a tenor or the length of most baritones.
Any suggestions? Cheers!
Started by Tim Pannabecker. Last reply by Paul Craig Nov 1, 2019. 18 Replies 0 Likes
Started by Paul Craig. Last reply by Paul Craig Jun 7, 2019. 28 Replies 0 Likes
Started by Donny Bell. Last reply by Reg Seward Mar 31, 2018. 2 Replies 3 Likes
Started by Adam Crofts. Last reply by William J Russell Oct 22, 2015. 2 Replies 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
Posted by billy jones bluez on February 8, 2024 at 4:05pm 0 Comments 0 Likes
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!
You need to be a member of Baritone Guitar (cbg) to add comments!